The value of the controlled variable, which under any fixed set of conditions the automatic controller operates to maintain, is known as ()
在燃油黏度控制系统中,以燃油黏度为被控量,而不用温度为被控量的原因是()。
The most variable factor in the control of broken stowage is().
在反馈控制系统中,过渡过程时间是指受扰动后,被控量重新稳定所需的时间,通常规定被控量的波动值为()时,过渡过程时间结束。
()接受控制量并输出被控量。
自动控制系统中,被控量又称为输出量。
In a pneumatic automation system, a unit producing a signal to govern the position of the controller of the measured variable, relative to the value of the measured variable, is said to have().
The steady state difference between the control point and the value of the controlled variable, corresponding with the set point, is known as ()
A member variable defined in a class can be accessed only by the classes in the same package. Which modifier should be used to obtain the access control?()
被控变量达到新的稳态值后,输出的变化量与输入的变化量之比是被控对象的()
A class design requires that a member variable cannot be accessible directly outside the class. Which modifier should be used to obtain the access control?()
在反馈控制系统中,控制装置对()施加的控制作用,是取自被控量的反馈信息,用来不断修正被控量与输入量之间的偏差。
测量变送器测量被控量的大小和变化,并把被控量转换成统一的标准信号,在电动控制系统中是()电流信号。
闭环控制系统可以抑制闭环内的一切干扰,但往往对时间常数大的被控对象反应慢。开环控制系统在按干扰控制时,由于没有被控量反馈,因此不能最后检查被控量是否等于给定值。
从被控参数开始偏离到偏离量消失的这段时间,被控参数一直随时间变化,这段过程称为()
输入到被控系统中并对被控参数产生影响的信号叫控制量。()
闭环控制系统可以抑制闭环内的一切干扰,但往往对时间常数大的被控对象反应慢。开环控制系统在按干扰控制时,由于没有被控量反馈,因此不能最后检查被控量是否等于给定值。(V)
使工作机械、或生产过程(被控对象)的某一个物理量(被控量)按预定的规律(给定量)运行,称为____;在无人直接参与的情况下,利用控制装置,使工作机械、或生产过程(被控对象)的某一个物理量(被控量)按预定的规律(给定量)运行,称为____。
测量变送器测量被控量的大小和变化,并把被控量转换成统一的标准信号,在电动控制系统中是()电流信号。
通过打开开关使电灯亮灭的过程中,被控对象为(),被控量为()。
用来测量被控量的实际值,并经过信号处理,转换为与被控量有一定函数关系,且与输入信号同一物理量的信号是()
【简答题】翻译下面的专业文字 Controlled system There are complex relationships between the manipulated variable and the controlled variable. These relationships result from the physical interdependence of the two variables. The part of the control that describes the physical processes is called the controlled system.
以进口水温为被控量的柴油机气缸冷却水温度控制系统中,被控对象是()。