What is placed on the under side of an inflatable liferaft to help prevent it from being skidded by the wind or overturned?（）

A . To cut off the power when the davits hit the track safety stops B . To stop the davits from going too fast C . To cut off the power when the davits are about 12 inches or more from the track safety stops D . None of the above

A . Utility allows for activation of resources by the hour. CUoD allows for permanent access to additional resources installed into the system. B . Utility allows for permanent access to additional resources installed into the system. CuOD allows for activation of resources by the hour. C . Utility allows for activation of resources by the minute. CUoD allows for permanent access to additional resources installed into the system. D . Utility allows for a 30 day usage of additional resources installed into the system. CUoD allows for permanent access to additional resources installed into the system.

A . On the RAM of the ISR B . On the USB memory stick of the ISR C . On the NVRAM of the ISR D . On the IPS Module of the ISR E . On the Flash memory of the ISR

A . Alien Crew List B . Crew List C . Passenger List D . separate Passenger List marked stowaway

A .  The request is placed in the transactor queue in FIFO order and the management information tree is updated. B .  The request is placed in the replicator and persistifier and the store is updated. C .  The request is placed in the data management engine and the application gateway is updated.  D .  The request is placed in the buffer queue and the commit buffer queue is updated.

A . Captain's cabin B . Chief Officer's locker C . Chartroom D . Pilot's cabi

A . Put one line at the low point and one at the high point of the bollard so they don't touch B . Take the eye of the second line up through the eye of the first line before putting the second line on the bollard C . Never put two mooring lines on the same bollard D . The mooring line forward should be put on the bollard first

A . Framing B . De-encapsulation C . Encapsulation D . De-framing E . None of the above

A . The cost is set to 10 for all interfaces. B . The cost is set to 10 for LAN interfaces and 20 for WAN interfaces. C . The cost is based on the speed of the interface. D . The cost is based o n a composite of bandwidth and delay of the interface.

A . IBM sales manual B . IBM Redbooks Website C . IBM eServer p5 and pSeries Qs and As D . IBM eServer p5 and pSeries Facts and Feature

A . Longitude B . Latitude C . Height D . Bearing

A．Scheduling details for repair work B．Feedback from employees C．Inspiration from the CEO D．Updated company sales information

A．Shopping. B．Watching a show. C．Trying the local food. D．Visiting art galleries.

A．Taking risks. B．Trying the taste of failure. C．Trying the taste-of success. D．High ability of self-protection.

<img src='https://img2.soutiyun.com/shangxueba/ask/64407001-64410000/64409000/17b75ef15006e963a847746eb8ec9a38.png' /> A.Configure the no ip subnet-zero command on R1, R2, and R3. B.Dynamic routing protocols such as RIPv2 cannot be used across Frame Relay networks. C.Configure the S0/0 interface on R1 as two subinterfaces and configure point-to-point links to R2 and R3. D.Change the 172.16.2.0/25 and 172.16.2.128/25 subnetworks so that at least two bits are borrowed from the last octet. E.Change the network address configuration to eliminate the discontiguous 172.16.2.0/25 and 172.16.2.128/25 subnetwork.

A．The company name that made Mr. White"s car B．The licence plate number of Mr. White C．The employee ID number D．The purchase date of Mr. White"s car

—I have _____, but I can check it for you in the newspaper（） A．not idea B．no idea C．no ideas D．not ideas

A．Being rash to make career decisions. B．Starting career planning as soon as possible. C．Getting professional help. D．Obtaining internship trainings.