-
What are two characteristics of the Cisco Validated Design program? ()(Choose two.)
A . facilitates customer deployments that are less reliable
B . facilitates customer deployments that are more predictable
C . separates products and technologies into individual portfolios
D . incorporates products and technologies into a broad portfolio
E . strives to protect access to design documentatio
-
What are the two results of this configuration?()
A . The default route should have a next hop address of 64.100.0.3.
B . Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C . The address of the subnet segment with the WWW server will support seven more servers.
D . The addressing scheme allows users on the Internet to access the WWW server.
E . Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.
-
What are two reasons to create synonyms? ()
A . You have too many tables.
B . Your tables are too long.
C . Your tables have difficult names.
D . You want to work on your own tables.
E . You want to use another schema's tables.
F . You have too many columns in your tables.
-
What are two characteristics of Telnet? (Choose two.)()
A . It sends data in clear text format.
B . It is no longer supported on Cisco network devices.
C . It is more secure than SSH
D . It requires an enterprise license in order to be implemented.
E . It requires that the destination device be configured to support Telnet connections.
-
What are two design guidelines for VoIP networks? ()
A . Delay should be no more than 10 ms.
B . Loss should be no more than1 percent.
C . Jitter should be less then 40 ms.
D . Managed bandwidth is strongly recommended for voice control traffic.
-
What are two characteristics of RIPv2?()
A . classful routing protocol
B . variable-length subnet masks
C . broadcast addressing
D . manual route summarization
E . uses SPF algorithm to compute path
-
What are two key characteristics of VTP? ()
A . VTP messages are sent out all switch-switch connections.
B . VTP L2 messages are communicated to neighbors using CDP.
C . VTP manages addition, deletion, and renaming of VLANs 1 to 4094.
D . VTP pruning restricts flooded traffic, increasing available bandwidth.
E . VTP V2 can only be used in a domain consisting of V2 capable switches.
F . VTP V2 performs consistency checks on all sources of VLAN information.
-
What are two characteristics of the Cisco Validated Design program?() (Choose two.)
A . facilitates customer deployments that are less reliable
B . facilitates customer deployments that are more predictable
C . separates products and technologies into individual portfolios
D . incorporates products and technologies into a broad portfol
E . strives to protect access to design documentatio
-
What two are the prerequisites for enabling Flashback Database?() (Choose two)
A . The database must be in ARCHIVELOG mode
B . The database must be in MOUNT EXCLUSIVE mode
C . The database must be opened in RESTRICTED mode
D . The database instance must be started in the NOMOUNT state
E . The database instance must have the keep buffer pool defined
-
What are two reasons a network administrator would use CDP (Choose two.)()。
A . to verify the type of cable interconnecting two devices
B . to determine the status of network services on a remote device
C . to obtain VLAN information from directly connected switches
D . to verify Layer 2 connectivity between two devices when Layer 3 fails
E . to obtain the IP address of a connected device in order to telnet to the device
F . to determine the status of the routing protocols between directly connected router
-
What are two characteristics of GSS? ()
A . It helps verify end-to-end path availability.
B . It provides traffic rerouting in case of disaster.
C . HSRP, GLBP, and VRRP can be clients of GSS.
D . BGP must be the routing protocol between the distributed data centers.
E . DNS responsiveness is improved by providing centralized domain management.
-
What are two characteristics of OER? ()
A . It can take on HSRP, VRRP, and GLBP as clients.
B . It provides automatic inbound route optimization.
C . Path selection may be based on delay, loss, or jitter.
D . The border router makes decisions about which outbound path to use.
E . Automatic load distribution is provided for multiple connections.
-
What are two uRPF working modes?()
A . express mode
B . safe mode
C . loose mode
D . strict mode
E . tight mode
-
What are two characteristics of GSS?()
A . It helps verify end-to-end path availability.
B . It provides traffic rerouting in case of disaster.
C . HSRP, GLBP, and VRRP can be clients of GSS.
D . BGP must be the routing protocol between the distributed data centers.
E . DNS responsiveness is improved by providing centralized domain management.
-
What are two characteristics of OER? ()
A . It can take on HSRP, VRRP, and GLBP as clients.
B . It provides automatic inbound route optimization.
C . Path selection may be based on delay, loss, or jitter.
D . The border router makes decisions about which outbound path to use.
E . Automatic load distribution is provided for multiple connections.
-
What are two outcomes of deploying virtual SANs? ()(Choose two.)
A . increased administration
B . improved availability
C . reduced backup
D . increased security
E . greater storage demand
-
What are two characteristics of Telnet (Choose two.)()。
A . Itsendsdataincleartextformat.
B . ItisnolongersupportedonCisconetworkdevices.
C . ItismoresecurethanSSH
D . Itrequiresanenterpriselicenseinordertobeimplemented.
E . ItrequiresthatthedestinationdevicebeconfiguredtosupportTelnetconnections.
-
What are two benefits of using NAT?()
A . NAT protects network security because private networks are not advertised.
B . NAT accelerates the routing process because no modifications are made on the packets.
C . Dynamic NAT facilitates connections from the outside of the network.
D . NAT facilitates end-to-end communication when IPsec is enable.
E . NAT eliminates the need to re-address all host that require extemal access.
F . NAT conserves addresses through host MAC-level multiplexing.
-
What are the two parallel SCSI specifications?()
A . Up to 25 m bus length
B . Only one device per SCSI bus
C . Up to 16 devices per SCSI bus
D . Half-duplex operation
E . Full-duplex operatio
-
What are two characteristics of RIPv2? ()
A . classful routing protocol
B . variable-length subnet masks
C . broadcast addressing
D . manual route summarization
E . uses SPF algorithm to compute path
-
What are two reasons a network administrator would use CDP? (Choose two.)()
A . to verify the type of cable interconnecting two devices
B . to determine the status of network services on a remote device
C . to obtain VLAN information from directly connected switches
D . to verify Layer 2 connectivity between two devices when Layer 3 fails
E . to obtain the IP address of a connected device in order to telnet to the device
F . to determine the status of the routing protocols between directly connected router
-
1.What are the two speakers talking about?
-
What are the two main ballroom styles?
-
What are the two methods of organization?
-
What are the two speakers talking about?