Bus Interface Unit BIU
Which of the following commands would be applied to a WAN interface, but not on LAN Interface?()
BRI(Basic Rate Interface)基本速率接口
You need make configuration changes to an existing layer 3 switch in the Company network. On a multilayer Catalyst switch, which interface command is used to convert a Layer 3 interface to a Layer 2 interface?()
public interface A { String DEFAULT_GREETING = “Hello World”; public void method1(); } A programmer wants to create an interface called B that has A as its parent. Which interface declaration is correct?()
已知某台路由器的路由表中有如下两个表项:C DestinAtion/MAstprotocolpreferenMetricNexthop/InterfAce 9.0.0.0/8OSPF10501.1.1.1/SeriAl0 9.1.0.0/16RIP10052.2.2.2/Ethernet0 如果该路由器要转发目的地址为9.1.4.5的报文,则下列说法中正确的是()
Refer to the exhibit. Based on the configuration shown, which queuing mechanism has been configured on interface serial 1/0?()https://assets.asklib.com/images/image2/2018072409525852319.jpg
[Quidway]dot1x enable [Quidway]interface gigabitethernet1/0/0 [Quidway-GigabitEthernet1/0/0]dot1x enable [Quidway-GigabitEthernet1/0/0]dot1x max-user100 [Quidway-GigabitEthernet1/0/0]dot1x mac-bypass 关于此段命令的解释正确的是()。
接口(interface)是指:()
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.https://assets.asklib.com/images/image2/2018072709533319197.jpg
土壤-根界面 soil-root interface
TSRI(Temporary Speed Restriction Interface)指()。
下列关于interface的说法正确的是:( )
能够用来修饰interface的有()
GUI:graphical user interface
已知某台路由器的路由表中有如下两个表项:Destination/MastprotocolpreferenceMetricNexthop/Interface9.0.0.0/8OSPF10501.1.1.1/Serial09.1.0.0/16RIP10052.2.2.2/Ethernet0如果该路由器要转发目的地址为9.1.4.5的报文,则下列说法中正确的是()。
Router R1 has the following configuration. Assuming R1‘s F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?()interface f0/0ipv6 address 2345:0:0:8::1/64
A router has been configured with the commands router os pf 9, network 172.16.1.0 0.0.0.255 area 8, and network 172.16.0.0 0.0.255.255 area 9, in that order. No other OSPF -related commands have been configured. The answers list the IP addresses that could be assigned to this router‘s Fa0/0 interface.Which an swers list an IP address/prefix length that would cause the router to put Fa0/0 into area 9?()
以上信息是从某路由器截取的部分组播配置,请问,在接口 interface Ethernet6/1/0 下配 置 igmp enable 命令后,在查询器启动后,igmp 发送时间间隔是()秒
下面是路由器RTA的部分配置【RTA】OSPF 100【RTA-OSPF-100】SILENT-INTERFACE GIGABITETHERNET 1/0/0对于此部分配置描述正确的是()
关于设备swc的上述配置说法正确的是()[SWC]stp instance 1 priority 4096[SWC]interface Ethernet 1/0/13[SWC-Ethernet 1/0/13]stp point-to-point force-true[SWC]interface Ethernet 1/0/2[SwC-Ethernet 1/0/2]stp edged-port enable
关于设备SWC的配置说法正确的是【SWC】STP INSTANCE 1 PRIORITY 4096 【SWC】INTERFACE ETHERNET 1/0/12 【SWC-ETHERNER 1/0/12】STP POINT-TO-POINT FORCE-TRUE 【SWC】INTERFACE ETHERNET 1/0/2 【SWC-ETHERNET1/0/2】STP EDGED-PORT ENABLE()
下列接口不在Interface板上的?()
Interface中可以有静态方法吗?