-
Which statements describe two of the benefits of VLAN Trunking Protocol?()
A . VTP allows routing between VLANs.
B . VTP allows a single switch port to carry information to more than one VLAN.
C . VTP allows physically redundant links while preventing switching loops.
D . VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E . VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F . VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
-
Which two of these statements best describe the benefits of WPAv1? ()
A . SSID broadcast prevention
B . Improved mutual authentication
C . Improved encryption through AES
D . Improved protection against sniffing initialization vectors
E . RF jamming preventio
-
Which statements describe two of the benefits of VLAN Trunking Protocol?()
A . VTP allows routing between VLANs.
B . VTP allows a single switch port to carry information to more than one VLAN.
C . VTP allows physically redundant links while preventing switching loops.
D . VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E . VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F . VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
-
Which two statements are true about the function of CAC? ()
A . CAC provides guaranteed voice quality on a link.
B . CAC artificially limits the number of concurrent voice calls.
C . CAC is used to control the amount of bandwidth that is taken by a call on a link.
D . CAC prevents oversubscription of WAN resources that is caused by too much voice traffic.
E . CAC allows an unlimited number of voice calls while severely restricting, if necessary, other forms of traffic.
F . CAC solves voice congestion problems by using QoS to give priority to UDP traffic.
-
Which two statements are characteristics of pin groups?()
A . they are used internally within fcoe to map a vsan to a specifc vlan
B . they pin traffic fro a specific compute node mezzanine card to aspecific up link port
C . an iplink port for the adapter is chosen automatically if no pin group is set
-
Which two of these statements correctly describe classic PIM-SM?()
A . The IOS default is for a last-hop router to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
B . The IOS default is for every one of the routers on the shared tree to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
C . The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "infinity."
D . The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "zero."
-
Which two statements correctly describe characteristics of the PortFast feature? ()
A . STP will be disabled on the port.
B . PortFast can also be configured on trunk ports.
C . PortFast is required to enable port-based BPDU guard.
D . PortFast is used for both STP and RSTP host ports.
E . PortFast is used for STP-only host ports.
-
Which two of these statements are true of IPv6 address representation?()
A . There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast.
B . A single interface may be assigned multiple IPv6 addresses of any type.
C . Every IPv6 interface contains at least one loopback address.
D . The first 64 bits represent the dynamically created interface ID.
E . Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.
-
Which two statements are true about the implementation of QoS? ()
A . Implementing DiffServ involves the configuration of RSVP.
B . Implementing IntServ allows QoS to be performed by configuring only the ingress and egress devices.
C . Implementing IntServ involves the utilization of RSVP.
D . Traffic should be classified and marked by the core network devices.
E . Traffic should be classified and marked as close to the edge of the network as possible.
-
Which two of these statements regarding RSTP are correct?()
A . RSTP cannot operate with PVST+.
B . RSTP defines new port roles.
C . RSTP defines no new port states.
D . RSTP is a proprietary implementation of IEEE 802.1D STP.
E . RSTP is compatible with the original IEEE 802.1D STP.
-
Which two statements about the configuration of the switch interface are correct (Choose two)()。
A . The switchport belongs only to VLAN 2
B . Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2
C . The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2
D . A network host can be connected to this interface
-
Which two of these statements best describe the benefits of Cisco’s wireless IDS functionality? (Choose two.) ()
A . AirDefense for wireless IDS is required by autonomous APs.
B . 2.40Hz CK management can monitor both 802.11 and non-802.11 CK interference.
C . APs only monitor the RF channels that are servicing the clients.
D . Cisco or CCX compatible client cards can extend the CK IDS service for autonomous APs.
E . Autonomous APs must be dedicated IDS sensors while lightweight APs can combine client traffic and RF monitoring.
-
Which two statements regarding the LOGGING clause of the CREATE TABLESPACE... statement are correct?()
A . This clause is not valid for a temporary or undo tablespace.
B . If the tablespace is in the NOLOGGING mode,no operation on the tablespace will generate redo.
C . The tablespace will be in the NOLOGGING mode by default,if not specified while creating a tablespace.
D . The tablespace-level logging attribute can be overridden by logging specifications at the table,index, materialized view,materialized view log,and partition levels.
-
Which two statements are true about the implementation of QoS?()
A . Implementing DiffServ involves the configuration of RSVP.
B . Implementing IntServ allows QoS to be performed by configuring only the ingress and egress devices.
C . Implementing IntServ involves the utilization of RSVP.
D . Traffic should be classified and marked by the core network devices.
E . Traffic should be classified and marked as close to the edge of the network as possible.
-
Which two of these statements best describe the benefits of the Cisco Compatible Extensions Program? (Choose two.)()
A . offers a feature-rich implementation alternative to Wi-Fi certification
B . accelerates the availability of innovative features while maintaining interoperability
C . provides innovative features only on Cisco’s wireless client adapters
D . provides an evolving set of specifications for interoperability
E . eliminates the need for testing by providing innovative features to wireless client vendors through a one-time license fee
-
Which two statements are true about the function of CAC?()
A . CAC provides guaranteed voice quality on a link.
B . CAC artificially limits the number of concurrent voice calls.
C . CAC is used to control the amount of bandwidth that is taken by a call on a link.
D . CAC prevents oversubscription of WAN resources that is caused by too much voice traffic.
E . CAC allows an unlimited number of voice calls while severely restricting,if necessary,other forms of traffic.
F . CAC solves voice congestion problems by using QoS to give priority to UDP traffic.
-
Which two of these statements best describe fast secure roaming? (Choose two.)()
A . available only in autonomous APs
B . available in autonomous and lightweight APs
C . a feature of WDS in autonomous APs
D . a feature of WDS in lightweight APs
E . requires at least one AP and one Wireless LAN Services Module
-
Which two statements describe characteristics of IPv6 unicast addressing?()
A . Global addresses start with 2000::/3.
B . Link-local addresses start with FE00:/12.
C . Link-local addresses start with FF00::/10.
D . There is only one loopback address and it is ::1.
E . If a global address is assigned to an interface, then that is the only allowable address for the interface.
-
Which two of these statements regarding RSTP are correct?()
A . RSTP cannot operate with PVST+.
B . RSTP defines new port roles.
C . RSTP defines no new port states.
D . RSTP is a proprietary implementation of IEEE 802.1D STP.
E . RSTP is compatible with the original IEEE 802.1D STP.
-
Which two of these statements describe important aspects of performing a wireless site survey? (Choose two.) ()
A . An 802.11 g access point with a variety of antennas can be used in all standard site surveys.
B . Site surveys can be performed manually or through assisted site survey.
C . Channel power during testing starts at the default minimum and gradually increases to the maximum.
D . Overlapping access points can create performance problems.
E . Surveys should be done after hours in an office building or during reduced inventory levels in warehouses.
-
Which two statements describe the Cisco implementation of VLANs?()
A . VLAN 1 is the default Ethernet VLAN.
B . CDP advertisements are only sent on VLAN 1002.
C . By default, the management VLAN is VLAN 1005.
D . By default, the switch IP address is in VLAN 1005.
E . VLAN 1002 through 1005 are automatically created and cannot be deleted.
-
Which two statements are true regarding ownership of shared entities? ()(Choose two.)
A . Customers is owned by Oracle Human Resources whereas Locations is owned by Oracle Receivables.
B . Items is owned by Oracle Purchasing whereas Locations is owned by Oracle Receivables.
C . Sales Force is owned by Oracle Order Management whereas Employees is owned by Oracle Human Resources.
D . Set of books is owned by Oracle General Ledger whereas Locations is owned by Oracle Human Resources.
E . Suppliers is owned by Oracle Purchasing whereas Units of Measure is owned by Oracle Inventory.
-
Which two of the following statements are true about HSRP load sharing?() (Choose two)
A . It is achieved by using more than one HSRP group.
B . It is done in regards to either round robin or weight basis.
C . It is used to offload the active router in a certain HSRP group.
D . Single group HSRP is used to achieve more efficient link utilization.
E . The return traffic is influenced by HSRP load sharing configuration.
-
Which of the following statements is NOT true of the two ferry disasters.
A.They traveled during'the April-May stormy season.
B.They sank on April 21.
C.The exact number of deaths could be easily determined.
D.They sank somewhere near Dhaka.