-
Company.com wants to change the resource allocation for their AIX 5L V5.3 micro LPAR system. What is the smallest processor allocation than can be moved between partitions?()
A . A full processor
B . 1% of a processor
C . 10% of a processor
D . 25% of a processor
-
As a frame leaves a Layer 3 device, the Layer 2 encapsulation information is changed from what it was when it entered the devicE.For what two reasons can this happen? ()
A . The data is moving from 10BASE-TX to 100BASE-TX.
B . The WAN encapsulation type has changed.
C . The data format has changed from analog to digital.
D . The source and destination hosts are in the same subnet.
E . The source and destination MAC addresses have changed.
-
You created a department report and preview it in life preview. The font for the department name is too small and you want to enlarge it but do not want to change the font for any other fields. What is the easiest way to make this change?()
A . Select the text to be enlarged in the life previewer and make the size change using the style bar.
B . Select the text to be enlarged in the layout mode and make the change.
C . Open the report wizard in the re-entrant mode and make the change.
D . Make the copy of the report, open the copy, make the changes and then delete the original report.&e
-
You are trying to change the polling parameters used by the location manager via the Cisco WCS,and your request is being denied. What is wrong?()
A . Your login does not have the correct permissions.
B . You must wait for the location server to become available.
C . Polling values can be changed only on the location server.
D . Polling values can be changed only in the maintenance window.
-
You are trying to change the polling parameters used by the location manager via the Cisco WCS,and your request is being denied. What is wrong?()
A . Polling values can be changed only in the maintenance window.
B . Polling values can be changed only on the location server.
C . Your login does not have the correct permissions.
D . You must wait for the location server to become available.
-
What is the purpose of the until change option of the restore command?()
A . It allows you to select the SCN that you want to restore to.
B . It allows you to select the log sequence number you want to restore to.
C . It allows you to select the timestamp you want to restore to.
D . It allows you to manually stop the restore at any time as online redo logs are applied.
E . None of the above.
-
You create a financial report to be represented to board of directors. The accounting manager has asked you to change the number format to show a thousand separator. What is the best method to make this change to the report quickly?()
A . Open the property palette and set the format mask for all the numeric items in the report.
B . Select the data to be free formatted in the life previewer and lick on the thousand separator icon on the style bar.
C . Go to the layout model and change the field attributes for the data to be changed on the report.
D . Rebuild the report using the report wizard setting this format on creation.
-
After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?()
A . Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.
B . Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST.
C . Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.
D . POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.
E . Load and test IOS, load configuration files, test software routines, POST.
-
What is the effect of changing DMT interleaved delay from 3 milliseconds to 15 milliseconds?()
A . Latency remains the same, but throughput is decreased.
B . Latency remains the same, but error correction effectives may also be reduced.
C . Latency is increased, but faster error correction occurs.
D . Fewer ATM PVCs can be provisioned on DSL line.
-
What is used to correct for both induced and permanent magnetism,and consequently must be readjusted with radical changes in latitude().
A . Flinders bar
B . Soft iron spheres
C . Fore-and-aft permanent magnets in their trays
D . Heeling magnet
-
When STP UplinkFast is enabled on a switch utilizing the default bridge priority, what will the new bridge priority be changed to?()
A . 8192
B . 16384
C . 49152
D . 65535
-
As a frame leaves a Layer 3 device,the Layer 2 encapsulation information is changed from what it was when it entered the device. For what two reasons can this happen?()
A . The data is moving from 10BASE-TX to 100BASE-TX.
B . The WAN encapsulation type has changed.
C . The data format has changed from analog to digital.
D . The source and destination hosts are in the same subnet.
E . The source and destination MAC addresses have changed.
-
MySQL is installed on a Linux server and has the following configuration:
https://assets.asklib.com/images/image2/2018080117282355979.jpg
What is the purpose of changing ownership of datadir to the ‘mysql’ user?()
A . MySQL requires correct file ownership while remaining secure
B . MySQL needs to be run as the root user, but file cannot be owned by it
C . MySQL cannot be run as the root user
-
You are trying to change the polling parameters used by the location manager via the Cisco WCS, and yourrequest is being denied. What is wrong?()
A . Your login does not have the correct permissions.
B . You must wait for the location server to become available.
C . Polling values can be changed only on the location server.
D . Polling values can be changed only in the maintenance window.
-
You are trying to change the polling parameters used by the location manager via the cisco wcs, and your request is being denied. What is wrong?()
A . polling values can be changed only in the maintenance window.
B . polling values can be changed only on the location server.
C . your login does not have the correct permissions.
D . you must wait for the location server to become available.
-
An administrator needs to change a system’s run level from level 2 to level 3. What is the appropriate method to accomplish this()
A . Use the reboot command.
B . Edit the /etc/reboot file and reboot the system.
C . Edit /etc/.init.state file and reboot the system.
D . Use the telinit command
-
In the case study where Lina is talking with her manager, what has changed in the second discussion that was not there in her first discussion?
-
Culture is constantly developing( ) and changing. Who we are, what we believe, what we want out of life, our view of justice, fairness, appropriateness are all the result of the culture we live in.
-
Please select a word to replace the underlined one.What they found out is so important that the university decided to make changes to its polices.
-
What the idiom “ 失之东隅,收之桑榆 ” states is that great changes have taken place in the world.
-
What we need change is not neccessarily our lifstyle,or our physical conditions, but rather our attitude towards life.
-
Changing the oil and filter on your car every 3,000 miles is an example of what kind
A.A.concurrent control
B.B.feedforward control
C.C.definitional control
D.D.feedback control
E.E.projected control
-
So it is today. Schedule disaster, functional misfits, and system bugs all arise because the left hand doesn&39;t know what the right hand is doing. As work (请作答此空), the several teams slowly change t
A.starts
B. proceeds
C. stops
D. speeds
-
You change the price for the current validity period in an info record.There are still two purchase orders for this material that is open for delivery from the relevant vendor.What happens when the price is changed in the info record? Please choose the correct answer.()
A.The moving average price of the material is recalculated
B.Invoice verification automatically receives a message about the price change made
C.The new price is immediately proposed for all new purchase orders created for the relevant material with the respective vendor
D.The PO price in the purchase orders that are still open is automatically changed to the new price