The easiest way to anchor a vessel in a current is to().
A . stem the current and make very slow headway when the anchor is dropped
B . stem the current and be falling aft very slowly when the anchor is dropped
C . stem the current and endeavor to make neither headway nor sternway when the anchor is dropped
D . stop all headway through the water and keep the current astern when the anchor is dropped
时间:2022-10-21 10:32:22
所属题库:潮汐与涌浪题库
相似题目
-
What is the normal length of anchor cable used to anchor a vessel?()
A . An amount equal to the depth of the water
B . Two times the depth of water
C . Three to four times the depth of water
D . Five to seven times the depth of water
-
In determining the scope of anchor line to pay out when anchoring a small boat,one must consider the().
A . charted depth of water only
B . depth of water,including tidal differences
C . time and date of anchoring
D . type of anchor being used
-
The ()belongs to the anchor handling equipment.
A . chain lifter
B . winch barrel
C . slewing rim
D . warping dru
-
You created a department report and preview it in life preview. The font for the department name is too small and you want to enlarge it but do not want to change the font for any other fields. What is the easiest way to make this change?()
A . Select the text to be enlarged in the life previewer and make the size change using the style bar.
B . Select the text to be enlarged in the layout mode and make the change.
C . Open the report wizard in the re-entrant mode and make the change.
D . Make the copy of the report, open the copy, make the changes and then delete the original report.&e
-
The purpose of the stripping bar on an anchor windlass is to().
A . clean off any mud that may have accumulated on the chain
B . engage or disengage the wildcat
C . fairlead the chain from the hawse pipe to the wildcat
D . prevent the chain from fouling the wildcat
-
To safely anchor a vessel there must be sufficient scope in the anchor cable. Scope is the ratio of().
A . weight of cable to weight of vessel
B . weight of cable to weight of anchor
C . length of anchor to depth of water
D . length of cable to depth of water
-
When troubleshooting the issue, you notice the election of a new root bridge with an unknown MAC address. Knowing that all access ports have the PortFast feature enabled, what would be the easiest way to resolve the issue without losing redundant links?()
A . Enable bpduguard globally.
B . Enable rootguard.
C . Enable loopguard.
D . Enable spanning tree.
E . Enable UDLD
-
Due to the shape of the sea anchor,the best way to haul it back aboard is by().
A . hauling in on the anchor line as you would any anchor
B . getting all hands to assist
C . its trip line
D . cutting the line,as you cannot haul it back i
-
To secure a vessel in a particular place by means of chains or ropes made frast to the shore, to anchors, or to anchored mooring buoys, or to ride with both anchors down defines().
A . To moor
B . to berth
C . to anchor
D . to ride at anchor
-
() belongs to the anchor handling equipment.
A、performing a check run on the unit at regular intervals
B、testing the hydraulic fluid for proper pH
C、checking the reservoir for proper level
D、cleaning strainers at regular intervals
-
You want to create a template to be used as a standard for all company reports. What is the easiest way to do this?()
A . Open an existing template file, rename it and modify the template objects.
B . Open the report wizard and create a new template.
C . Open the layout model and copy the paste items from the default templates provided in report builder.
D . Templates cannot be modified in release 2.
-
When anchored,increasing the scope of the anchor chain normally serves to().
A . prevent fouling of the anchor
B . decrease swing of the vessel
C . prevent dragging of the anchor
D . reduce strain on the windla
-
To develop maximum anchor holding power,the optimum angle between the anchor’s shank and the mooring lines is().
A . 0 degrees
B . 10 degrees
C . 20 degrees
D . 30 degree
-
A customer requires a 2-way solution now that will be the easiest and least disruptive to upgrade to a 4-way in the future. Which of the following solutions best matches these requirements?()
A . p630 2-way Active 2-way Inactive
B . p655 2-way Active 2-way Inactive
C . p5-520 2-way Active 2-way Inactive
D . p5-550 2-way Active 2-way Inactive
-
When the anchor is brought to and holding,the horizontal component of anchor cable tensions should equal the().
A . displacement tonnage
B . weight forces
C . buoyancy forces
D . environmental force
-
Fracture damage to the end links of the anchor cable,or to the jews’ harp may be eliminated by().
A . using a small diameter connecting shackle
B . ensuring the swivel is well lubricated and free to turn
C . installing the connecting shackle with the bow towards the anchor
D . securing a piece of wood to the jews' har
-
The () is used to handle the anchor.
A . steering gear
B . windlass
C . deck crane
D . warping drum
-
The purpose of the tripping line on a sea anchor is to().
A . Aid in casting off
B . Direct the drift of the vessel
C . Aid in its recovery
D . Maintain maximum resistance to broaching
-
To writers, the beginning is the easiest part of a composition because they can write whatever they want.
-
Remittance is the easiest way to transfer proceeds, so we should use it more frequently than other ways.
-
_____ belongs to the anchor handling equipment.
A.jib stopper
B.winch barrel
C.slewing rim
D.windlass
-
According to the text, it is easiest to overlook ______ as one of the several parts of a microcomputer system.
A.procedures B.people
C.hardware & software D.data
-
According to the author, the easiest way to remember your dreams is to ______.
A.put a notebook and pen next to your bed
B.try to recall the dreams
C.re-enter the previous dreams
D.keep a dream journal