LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers.  Which command will validate that both storage paths are available？（）

A . Configure the RSA with an IP address B . Configure the BMC with an IP address C . Configure the AMM with an IP address D . Configure the IMM with an IP addre

A . Weight B . Origin code C . AS_Path D . Local_Pref

A . CiscoWorks VPN Manager  B . deploy Linksys routers with menu-driven configuration C . Easy VPN client mode  D . disable 802.1x and Auth Proxy on the Teleworker router

A .  BACKUP AS COMPRESSED BACKUPSET DATABASE B .  BACKUP AS COMPRESSED COPY OF DATABASE C .  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET D .  CONFIGURE DEVICE TYPE DISK BACKUP TYPE COMPRESS  E .  BACKUP DATABASE COMPRESS

A . Lspath B . sdd query adapter C . pcmpath query adapter D . datapath query device

A . Set the SSID value in the client software to public. B . Configure open authentication on the AP and the client. C . Set the SSID value on the client to the SSID configured on the AP. D . Configured MAC address filtering to permit the client to connect to the AP.

A . mode sso, redundancy, show redundancy states B . show redundancy states, mode sso, redundancy C . redundancy, mode sso, show redundancy states D . show redundancy states, redundancy, mode sso

A . lspath B . sdd query adapter C . pcmpath query adapter D . datapath query device

A . Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command. B . Configure the net sy stem - id and the network net - id commands under routerisis. C . Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command. D . Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis. E . Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.

A . license information B . Alarm and Trace Configuration  C . CRS Installer  D . Control Center

A . ip route 172.16.1.0 255.255.255.0 0.0.0.0 B . ip route 172.16.1.0 255.255.255.0 172.16.2.1 C . ip route 0.0.0.0 255.255.255.0 172.16.2.1 D . ip route 0.0.0.0 0.0.0.0 172.16.2.1

A . Set the SSID value in the client software to public. B . Configure open authentication on the AP and the client. C . Set the SSID value on the client to the SSID configured on the AP D . Configure MAC address filtering to permit the client to connect to the AP

A . interface gig3/1 spanning-tree guard root B . interface gig3/1 spanning-tree root guard C . interface gig3/1 spanning-tree root-guard D . interface gig3/1 spanning-tree root-guard default

A . It tells the router or switch to try establish an SSH connection first and if that fail to use telnet. B . It configures a cisco network device to use the SSH protocol on incoming communications via the virtual terminal ports. C . It allows seven failed login attempts before the VTY lines are temporarily shutdown. D . It configures the virtual terminal lines with the password 030752180500. E . It configures SSH globally for all logins.

A . On the ABR router ospf 10 area 3 stub B . On all Area 3 routers router ospf 10 area 3 stub C . On all Area 3 routers router ospf 10 area 3 stub no - summary D . On the ABR router ospf 10 area 3 nssa E . On the ABR rou ter ospf 10 area 3 stub no - summary

A . enabling modular QoS over Frame Relay B . enabling Real-Time Transport Protocol （RTP） header compression C . enabling distributed compressed Transmission Control Protocol D . enabling latency and jitter reduction for Transmission Control traffic E . enabling TCP header compressio

A . pdadmin B . pdconfig C . web_config D . config_we

A . Answer file. B . Startup file. C . Unattended configuration file. D . Network file.

A . /usr/sbin/nim_init B . /usr/bin/installnim C . /usr/sbin/nimconfig D . /usr/sbin/setup_server

A . The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2 B . The configuration is invalid because the DHCP options are global configuration commands C . The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces D . The router will choose which pool to use based upon the interface the DHCP request wasreceived o

A . DS Storage Manager B . Tivoli Storage Manager C . Remote Support Manager D . Tivoli Provisioning Manager

<img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/7d97864996209a34c87d227a35adff83.png' /> A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands. B. The router will rebroadcast any UDP broadcasts received by this interface out to all interfaces included in the ip helper - address commands. C. The router will unicast any DHCP requests received by this interface out to all addresses included in the ip helper - address commands. D. This configuration will not do anything because the ip helper - address command needs to also be applied to the 192.168.23.1 IP address.

<img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/26702676062fb859e8189d08761485ce.jpg' /> A．A B．B C．C D．D

Network Access Protection (NAP) is configured for the corporate network.Users connect to the corporate network by using portable computers.The company policy requires confidentiality of data when the data is in transit between the portable computers and the servers.You need to ensure that users can access network resources only from computers that comply with the company policy.What should you do？（） A. Create an IPsec Enforcement Network policy. B. Create an 802.1X Enforcement Network policy. C. Create a Wired Network (IEEE 802.3) Group policy. D. Create an Extensible Authentication Protocol (EAP) Enforcement Network policy.