The cylinder liner forming the cylinder wall and the inside of the water jacket is called a()
When the air charge contacts with the cylinders and pistons and mixes with the residual gases, it will()
In some type of two-stroke engines, besides some small holes for(), starting valve, safety valve, indicator cock, and central opening in each cylinder cover for mounting the()
In an engine with air inlet valve and exhaust valve on its cylinder heads the fresh air will enter into the cylinder () and the gases exhaust (), there being an adequate overlap between the inlet opening and the exhaust closing.
Cold clearances between the skirt of an aluminum piston and the cylinder liner is about ()
The cylinder cover is not provided with ().
Fresh water is used for the cooling of cylinder jackets and () of the marine diesel engine.
An efficient seal between the cylinder block and cylinder heads on many diesel engines is obtained with()
The cylinder head, cylinder liner and () form the combustion chamber.
Cracks in cylinder and cylinder covers may () from unequal heating.
In addition to lubricating, cylinder oil assists in forming a gas seal and contains () which clean the cylinder liner.
The cylinder covers and the liners are bolted together by means of studs () the cylinder frames.
The space between cylinder liner and jacket is called ().
The cooling water jacket is common to all the cylinders but there are often () to ensure that each cylinder receives the right amount and flow of water.
Once a scavenge fire is detected, fuel should be shut off from the affected cylinders and cylinder lubrication increased () the risk of seizure.
A-frames are mounted on the bed plate and support () and cylinder block.
Oil is supplied to the cylinder wall and () by means of mechanical lubricators.
There is a () system lubricating the running gear and cooling the piston and sometimes lubricating the cylinders.
() power is the power developed within the cylinder and can be measured by an engine indicator.
The cylinder covers are secured by eight elastic holding down arranged in four pairs()
The () chamber is enclosed between the cylinder head and piston.
The major difference between CIF and CFR is that under CIF, the seller is required to cover the()
The very north and south regions are covered with ice and snow.
The difference between the covered and uncovered interest parity conditions is()