You are a network administrator of a large investor relations company that uses a switchednetwork to carry both data and IP telephony services. Why should you carry voice traffic on aseparate VLAN？（）

A . Allow all inbound VPN traffic to pass through the internal firewall and the perimeter firewall. B . Allow all inbound VPN traffic to pass through the perimeter firewall only.   C . Allow all VPN traffic from the source IP address of 131.107.1.14 to pass through the internal firewall. D . Allow all VPN traffic from the source IP address of 191.168.1.0/24 to pass through the perimeter firewall.

A . cost savings B . product variety C . well-tested interoperability D . regular upgrade proce

A .  Allow all inbound VPN traffic to pass through the internal firewall and the perimeter firewall. B .  Allow all inbound VPN traffic to pass through the perimeter firewall only. C .  Allow all VPN traffic from the source IP address of 131.107.1.14 to pass through the internal firewall. D .  Allow all VPN traffic from the source IP address of 191.168.1.0/24 to pass through the perimeter firewall.

A . show ospf B . show ip route C . show ip protocols D . show ip ospf database E . None of the other alternatives apply

A . Both Gateway Load Balancing Protocoland Hot Stand by Router Protocol B . Gateway Load Balancing Protocol C . Virtual Router Redundancy Protocol D . Hot Stand by Router Protocol

A .  IEEE 802.1Q B .  IEEE 802.10 C .  Misconfigured NIC D .  User configuration E .  All of the above

A . Wireless router B . Hub C . Repeater D . Wireless network adapter

A . Create an organizational unit (OU) for all users who log on to any of the NewApp servers. B . Create an organizational unit (OU) named NewApp Users for the NewApp users. C . Create an organizational unit (OU) named NewApp Servers for the NewApp servers. D . Create a Group Policy object (GPO) for the NewApp Users OU to enforce the use of IPSec. E . Create a global group for all NewApp servers. Add this group to the NewApp Servers OU. F . Create a Group Policy object (GPO) for the NewApp Servers OU to enforce the use of smart cards.

A . A broadcast domain with too many hosts. B . Full duplex operation. C . Broadcast storms. D . Multicasting. E . Network Segmentation. F . Low bandwidth.

A . There are 254 usable subnets. B . There are 256 usable hosts per subnet. C . There are 50 usable subnets. D . There are 254 usable hosts per subnet. E . There are 24 usable hosts per subnet. F . There is one usable network.

A .  The VSS switch must be the root bridge for all VLANs and is automatically designated B .  The VSS switch is defined in RFC 4318 as a managed object C .  The PAgP+ or LACP protocols are used to maintain the operational state of the VSS devices D .  A VSS interoperates with a virtual port channel E .  The 802.1Q or ISL protocols are used to maintain the operational state of the VSS devices F .  A VSS increases the size of the spanning-tree domai

A . Reverse lookup zones B . Standard primary zones C . Standard secondary zones D . Active Directory-integrated zone

A . show ip ospf B . show ip route C . show ip protocol D . show ip ospf database E . None of the other alternatives apply

A . The VSS switch must be the root bridge for all VLANs and is automatically designated. B . The VSS switch is defined in RFC 4318 as a managed object. C . The PAgP+ or LACP protocols are used to maintain the operational state of the VSS devices. D . A VSS interoperates with a virtual port channel. E . The 802.1Q or ISL protocols are used to maintain the operational state of the VSS devices. F . A VSS increases the size of the spanning-tree domain.

A . While the standard user is logged on， at the consent prompt， click Continue and install the application. B . While the standard user is logged on， at the credential prompt， provide administrative credentials. C . Create a .pwl file that stores administrative credentials. Double-click the installation file. D . Copy the contents of the CD-ROM to the local hard disk. Run the application installation from  the local hard disk.

A .  Configure Internet Authentication Service （IAS） for accounting. B .  Configure the server running Routing and Remote Access to support L2TP. C .  Configure the server running Routing and Remote Access to restrict dial-in traffic to the NewApp servers only. D .  Create a separate account for remote access users. Configure these accounts to access the NewApp server only.

A .  Reverse lookup zones B .  Standard primary zones C .  Standard secondary zones D .  Active Directory-integrated zone

A .  The trunk link belongs to a specific VLAN. B .  Multiple trunk links are used to connect multiple end user devices. C .  A trunk link only supports native VLAN. D .  Trunk links use 802.10 to identify a VLAN. E .  The native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.

A . show ip ospf B . show ip route C . show ip protocol D . show ip ospfdatabase E . None of the other alternatives apply

The domain contains two Windows Server 2003 terminal servers that host applications that are used by company employees. An organization unit (OU) named TerminalServers contains only the computer accounts for these two Terminal servers. A Group Policy object (GPO) named TSPolicy is linked to the TerminalServers OU, and you have been granted the right to modify the GPO. Users should use the terminal servers to run only authorized applications. A custom financial application suite is currently the only allowed application. The financial application suite is installed in the folder C:\Program Files\MT Apps. The financial application suite contains many executable files. Users must also be able to use Internet Explorer to access a browser-based application on the company intranet. The browser-based application makes extensive use of unsigned ActiveX components. The financial application suite and the browser-based application are frequently updates with patches or new versions. You need to configure the terminal servers to prevent users from running unauthorized applications. You plan to configure software restriction policies in the TSPolicy GPO. To reduce administrative overhead, you want to create a solution that can be implemented once, without requiring constant reconfiguration. Which three actions should you perform to configure software restriction polices？（） (Each correct answer presents part of the solution. Choose three)

You upgrade the domain to a single Active Directory domain. All network servers now run Windows Server 2003, and all client computers run Windows XP Professional. Your staff provides technical support to the network. They frequently establish Remote Desktop connections with a domain controller named DC1. You hire 25 new support specialists for your staff. You use Csvde.exe to create Active Directory user accounts for all 25. A new support specialist named Paul reports that he cannot establish a Remote Desktop connection with DC1. He receives the message shown in the Logon Message exhibit. (Click the Exhibit button.) <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/c1ca10b5ef7976b1e62efd8e32fc3420.jpg' /> You open Gpedit.msc on DC1. You see the display shown in the Security Policy exhibit. (Click the Exhibit button.) <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/35218487c59e1ec9d3305e8d5fd23b81.jpg' /> You need to ensure that Paul can establish Remote Desktop connections with DC1. What should you do？ （）

You are administering a database stored in Automatic Storage Management (ASM). You use RMAN to back up the database and the MD_BACKUP command to back up the ASM metadata regularly. You lost an ASM disk group DG1 due to hardware failure.In which three ways can you re-create the lost disk group and restore the data？（） A. Use the MD_RESTORE command to restore metadata for an existing disk group by passing the existing disk group name as an input parameter and use RMAN to restore the data. B. Use the MKDG command to restore the disk group with the same configuration as the backed-up disk group and data on the disk group. C. Use the MD_RESTORE command to restore the disk group with the changed disk group specification, failure group specification, name, and other attributes and use RMAN to restore the data. D. Use the MKDG command to restore the disk group with the same configuration as the backed-up disk group name and same set of disks and failure group configuration, and use RMAN to restore the data. E. Use the MD_RESTORE command to restore both the metadata and data for the failed disk group. F. Use the MKDG command to add a new disk group DG1 with the same or different specifications for failure group and other attributes and use RMAN to restore the data.

A. Restore Sandra‘s TestKingStuff folder, and clear the Restore junction points, but not the folders and the file data they reference check box. B. Restore the Documents and Settings folder that contains the TestKingStuff folder. C. Restore Sandra‘s TestKingStuff folder, and choose an alternate location for the restoration. D. Restore Sandra‘s TestKingStuff folder, and choose the original location for the restoration.

A．Chmod-M30 B．Chgrp-d30 C．Chage-M30 D．Useradd-D30