-
Machinery driving fuel oil transfer and fuel oil service pumps must be fitted with a remote means of stopping the machinery from ().
A . within the space concerned
B . outside the space concerned
C . the throttle station
D . within the fire room
-
Which of the following machinery space operations is required to be logged in the Oil Record Book?()
A . Ballasting or cleaning of fuel oil tanks
B . Shifting suction of main fuel pump to reserve fuel oil tank
C . Changing out sprayer plates to adjust for steam demand
D . Daily inspection of engine room bilge
-
Before assuming command of a vessel,the new OOW must discuss with the one being(),all important operational features of the ship.
A、 received
B、 retrieved
C、 resumed
D、 relieved
-
Which of the following is NOT on the list items to be recorded in Oil Record Book Part I (machinery space operation)?()
A . Accidental discharge of oil
B . Disposal of oil residues
C . Quantity of water produced by FWG
D . Discharge of dirty ballast or cleaning water from fuel oil tank
-
When under maneouvring conditions with the machinery being manually operated the control unit or console should be ()
A . automatically controlled
B . continuously manned
C . off power
D . none of the above is true
-
You issued the following statement in your SQL*Plus session: SQL>ALTER SESSION ENABLE RESUMABLE TIMEOUT 600; Which operation is neither suspended nor resumed using the Automatic Resumable Allocation feature in your database?()
A . creating a table in your schema and you exceed your allocated space quota on the tablespace
B . executing a long query that involves a sort operation and the statement runs out of temporary space
C . loading data into tables by using the SQL*Loader and the number of extents in the table reaches the maximum limit
D . creating a table in a dictionary-managed tablespace with an explicit MAXEXTENTS setting which results in an out of space error
-
Oil Record Book Part I shall be provided to every oil tanker of 150 tons gross tonnage and above and every ship of 400 tons gross tonnage and above, () oil tankers, to record relevant machinery space operations.
A . as well as
B . as long as
C . rather than
D . other tha
-
The officer in charge of the engineering watch shall ensure that all machinery involved with the maneuvering of the ship can immediately be placed in the () of operation when notified that the ship is in congested waters.
A . manual mode
B . automatic mode
C . remote mode
D . follow-up mode
-
You are maintaining the SALES database for an organization. You have enabled the Flashback Database feature and want to estimate the flashback space required for future operations. Which view would you query to estimate the flashback space required?()
A . V$DATABASE
B . V$FLASHBACK_DATABASE_STAT
C . V$FLASHBACK_DATABASE_LOG
D . V$RECOVERY_FILE_DEST
-
When the machinery spaces are in the periodic unmanned condition, shall be immediately available and on call to attend the machinery space().
A . the chief engineer
B . the designated engineer from shipyard
C . the designated duty officer in charge of the engineering watch
D . the designated surveyor from classification society
-
Companycom has a requirement to consolidate six web application servers. There is unused capacity of 2 CPUs on their new p5 570. Which operating systems and or features are required?()
A . APV, AIX5.2ML4
B . AIX5.3 or i5/OS
C . APV, i5/OS, AIX5.3
D . APV, AIX5.3 or SuSE9
-
Each fire hydrant serving machinery spaces containing oil fired boilers,internal combustion machinery,or oil fuel units must be equipped with a().
A . fireman's outfit
B . low-velocity spray applicator
C . marine strainer
D . pick axe
-
Which TWO of the following are required to use the hot-swap memory feature of the x445 while being operating system independent?()
A . Memory Mirroring must be enabled in the BIOS.
B . Redundant bit steering must be enabled in the BIOS.
C . DIMMs must be the same size and speed as the DIMMs being replaced.
D . Memory Mirroring must be enabled in the operating system.
E . DIMMs can be of same size or larger or same speed or faster.
-
Before reassembling any machinery, you should ().
A . replace all bearings regardless of length of service
B . apply a heavy coat of oil to all mating surfaces
C . clean any corroded surfaces and file all burrs smooth
D . coat all parts with alemite grease
-
The officer in charge of the engineering watch shall continue to be responsible for machinery operations, ()the presence of the chief engineer in the machinery space.
A . as long as
B . unless
C . despite
D . till
-
You want to use the automatic management of backup and recovery operations features for your database.Which configuration must you set?()
A . Enable the flash recovery area and specify it as the archived redo log destination.
B . Disable the flash recovery area and start the database instance in ARCHIVELOG mode.
C . Enable the flash recovery area but do not specify it as the archived redo log destination.
D . Disable the flash recovery area and start the database instance in NOARCHIVELOG mode.
-
Before any machinery is put in operation,you should().
A . ventilate all compartments,see that the machinery is clean and there are no obstructions
B . just turn the key and start up
C . take for granted that there are no fuel leaks
D . assume there are no volatile fumes in the engine space
-
The guard, fencing or shielding for moving parts or machinery can be removed for repair only when the machinery it belongs to()
A . stays at rest
B . is working stably
C . is worn out
D . is in good operatio
-
A customer needs approximately 15 to 20 wireless APs for RF coverage. Given that the customer is going to use the 1010 light weight AP with the advanced feature set, what other product is required to complete this operational functionality? ()
A . 2700
B . WLSE
C . 4124
D . 2006
E . 4112
-
Which of the following should be recorded in Oil Record Book Part I (machinery space operation) ?()
A . Non automatic discharge overboard of machinery space bilge water
B . Automatic discharge overboard of machinery space bilge water
C . A and B
D . Neither A nor B
-
Which of the following operations must be entered on the Oil Record Book Part Ⅰ? () Ⅰ.Routine discharge at sea of bilge water containing oil from the machinery spaces Ⅱ.Bunkering of fuel oil
A . Ⅰ only
B . Ⅱ only
C . both Ⅰ and Ⅱ
D . neither Ⅰ nor Ⅱ
-
You want to use the automatic management of backup and recovery operations features for your database. Which configuration must you set?()
A . Enable the flash recovery area and specify it as the archived redo log destination.
B . Disable the flash recovery area and start the database instance in ARCHIVELOG mode.
C . Enable the flash recovery area but do not specify it as the archived redo log destination.
D . Disable the flash recovery area and start the database instance in NOARCHIVELOG mode.
-
Operating systems for mobile devices generally are as fully-featured as those made for desktop or laptop computers.
-
Machinery operating features are designed to help conserve energyWhich of the following results will not contribute to energy conservation?
A.Reduction of friction
B.Insulation of hot surfaces
C.Lubrication of moving parts
D.Elevation of cooler outlet temperatures