-
A system administrator types the command to change the hostname of a router. Where on the Cisco IFS is that change stored? ()
A . NVRAM
B . RAM
C . FLASH
D . ROM
E . PCMCIA
-
Choose two commands that are required to enable multicast on a router, when it is known that the receivers use a specific functionality of IGMPv3.()
A . ip pim rp-address
B . ip pim ssm
C . ip pim sparse-mode
D . ip pim passive
-
Which of the following statements is true about a router's eBGP peers that is not also true about that same router's iBGP peers?()
A . The eBGP peer neighborship uses TCP
B . The eBGP peer uses port 180 (default)
C . The eBGP peer uses the same ASN as the local router
D . The eBGP peer updates its AS_Path PA before sending updates to this router
-
Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two.)()
A . It is locally significant.
B . It is globally significant.
C . It is needed to identify a unique instance of an OSPF database.
D . It is an optional parameter required only if multiple OSPF processes are running on the router.
E . All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
-
On a router that is configured with multiple IP SLA probes, which command can be used to manage the CPU load that was created by the periodic probing?()
A . ip sla monitor low-memory
B . ip sla group schedule
C . ip sla reaction-trigger
D . ip sla enable timestam
-
Which statement describes the process ID that is used to run OSPF on a router ?()
A . It is locally significant and must be the same throughout an area
B . It is globally significant and is used to represent the AS number
C . It is locally significant and is used to identify an instance of the OSPF database
D . It is globally significant and is used to identify OSPF stub area
-
You use—login-path to access a MySQL server on a Linux installation. Which statement is true about the – login-path option that is created by using mysql_config_editor?()
A . All system users have access to the MySQL server via—login path local
B . login-path can be used only for MySQL servers running on a local machine
C . login-path allows you to provide login credentials without passing clear text passwords on the command line
D . When using – login-path to connect to a remote MySQL server, the remote server version must be 5.6 or later
-
Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()
A . A virtual link to area 0.
B . OSPF summarization command.
C . default - cost extension to the area command.
D . no - summary extension to the area stub comm and.
E . None of the other alternatives apply
-
Refer to the exhibit, Host A pings interface S0/0 on router 3, what is the TTL value for that ping?()https://assets.asklib.com/images/image2/2018072316292671645.jpg
A . 253
B . 252
C . 255
D . 254
-
What is the reason for configuring a passive interface on a router?()
A . Allows interfaces to share common IP addresses.
B . Allows an interface to remain up without the aid of keepalives.
C . Allows a router to send routing and not receive updates via that interface.
D . Allows a routing protocol to forward updates that is missing its IP address.
E . Allows a router to receive routing updates on an interface but not send updates via that interface.
-
Which of the following describe the process identifier that is used to run OSPF on a router?()
A . It is locally significant.
B . It is globally significant.
C . It is needed to identify a unique instance of an OSPF database.
D . It is an optional parameter required only if multiple OSPF processes are running on the router.
E . All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
-
Refer to the exhibit.After a RIP route is marked invalid on Router_1, how much time will elapse before that route is removed from the routing table?()https://assets.asklib.com/images/image2/2018072315210946254.jpg
A . 30 seconds
B . 60 seconds
C . 90 seconds
D . 180 seconds
E . 240 second
-
When HSRP is configured on a network, which two of these items are provided, which are sharedbetween the routers that run HSRP? ()(Choose two.)
A . TCP-based hello packets
B . the impact of flapping links if timers are too low
C . a shared single interface
D . the ability to track serial interfaces
E . UDP-based hello packet
-
When HSRP is configured on a network, which two of these items are provided, which are shared between the routers that run HSRP ?() (choose two)
A . Shared single interface
B . IP Address
C . TCP-based hello packets
D . MAC addre
-
Choose two commands that are required to enable multicast on a router, when it is known that thereceivers use a specific functionality of IGMPv3.()
A . ip pim rp-address
B . ip pim ssm
C . ip pim sparse-mode
D . ip pim passive
-
Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true?()
A . The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
B . The configuration is invalid because the DHCP options are global configuration commands
C . The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
D . The router will choose which pool to use based upon the interface the DHCP request wasreceived o
-
A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?()
A . There is an error in the router DRAM.
B . Te IOS image is corrupt.
C . The configuration register is set to 0x2142.
D . The TFTP server that contains the router configuration file is unreachable.
E . A boot system configuration command has placed the router into setup mode.
-
The TestKingA router is configured as shown below: TestKingA(config)# interface loopback 0 TestKingA(config-if)# ip address 192.168.16.24 255.255.255.255 As a result of this change, which of the statements below are true?()
A . It creates a virtual, software only, interface.
B . It provides a way to test the convergence of OSPF routing updates.
C . The mask of 255.255.255.255 is called a host mask.
D . It uses a wildcard mask of 255.255.255.255.
E . It ensures that an interface is always active for OSPF processes.
F . Loopback interfaces must be numbered 0.
-
Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)()。
A . It is locally significant
B . It is globally significant
C . It is needed to identify a unique instance of an OSPF database
D . It is an optional parameter required only if multiple OSPF processes are running on the router
E . All routers in the same OSPF area must have the same process ID if they are to exchange routing informatio
-
What is the best way to ensure that IKE/ISAKMP packets are not dropped when QoS is enabled on the uplink interface of the Teleworker router?()
A . QoS and IPSec should never be used together.
B . IKE/ISAKMP packets are DiffSERV codepoint CS6, so the traffic is never dropped.
C . Source IKE/ISAKMP packets off the loop-back address.
D . Classify IKE/ISAKMP packets so they are appropriately prioritized.
-
While troubleshooting a routing problem on the company EIGRP network you discover that one ofthe routers is failing to establish adjacencies with its neighbor. What is a likely cause of thisproblem between neighbors?()
A . The K-values do not match
B . The hold times do not match
C . The hello times do not match
D . The AS numbers do not match
-
Area Border Router (ABR) is a router located on the border of one or more OSPF areas that connect those areas to the backbone network. An ABR will inject a default route into which two types of areas?()
A . Area 0
B . NSSA
C . Totally stubby
D . Stu
-
There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is:Router A: 10.1.1.1/24Router B: 10.1.1.2/24Router C: 10.2.2.1/26Which statement is true about all the adjacencies that exist on that LAN?()
A. No routers are adjacent with each other.
B. Only Router A and Router B are adjacent at Level 1.
C. Only Router A and Router B are adjacent at Level 2.
D. All three routers are adjacent with each other at Level 1.