-
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp command output?()
A . The network was originated via redistribution of an interior gateway protocol into BGP
B . The network was defined by a static route
C . The network was originated via a network or aggregate command
D . The network was learned via EBGP
E . The network was learned via IBGP
-
Which of the following is the primary motivation for using BGP between an Enterprise and its ISPs?()
A . To influence the choice of best path (best route) for at least some routes
B . To avoid having to configure static routes
C . To allow redistribution of BGP routes into the IGP routing protocol
D . To monitor the size of the Internet BGP table
-
When BGP is used as the PE-CE routing protocol, which of these statements is correct?()
A . On the CE router, PE neighbors must be configured in the VRF context on the CE router
B . On PE routers, the CE IBGP neighbors are configured in the global BGP configuration
C . On PE routers, the CE EBGP neighbors are configured in the VRF context
D . A separate BGP process must be used on the PE routers for CE routers so that they do not use the same BGP routing process as that used for the PE router's other provider neighbor
-
When BGP tuning is used, how is packet flow into the e-commerce module controlled?()
A . by tracking the status of objects along the path to the e-commerce module
B . by detecting undesirable conditions along the path to the e-commerce module
C . by using the MED to communicate the site preferences for traffic to multiple ISPs
D . by communicating the available prefixes, routing policies, and preferences of each site to its ISP
E . by moving the SLB to a position where selected traffic to and from the servers does not go through the SLB
-
What 2 methods are available for overcoming the BGP full mesh requirement?
-
BGP best route selection process is based on what ?()
A . lowest cost
B . highest bandwidth
C . lowest hop-count
D . path attributes
E . lowest delay
-
Which BGP community is used to prevent the advertisement of the BGP prefix to other BGP peers?()
A . additive
B . none
C . no-export
D . no-advertise
E . local-a
-
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when usingthe "show ip bgp" command?()
A . The network was originated via redistribution of an interior gateway protocol into BGP
B . The network was defined by a static route
C . The network was learned via IBGP
D . The network was learned via EBGP
E . The network was originated via a network or aggregate command
-
If a metric is not specified for routes that are redistributed into OSPF, the default metric that is assigned to the routes is 20, except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes?()
A . 0
B . 1
C . 10
D . 200
-
Two BGP peers connected through a routed firewall are unable to establish a peering relationship. What could be the most likely cause? ()
A . BGP peers must be Layer 2-adjacent
B . EBGP multihop is not configured
C . The firewall is not configured to allow IP protocol 89
D . The firewall is not configured to allow UDP 179.
-
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the "show ip bgp" c ommand?()
A . The network was originated via redistribution of an interior gateway protocol into BGP.
B . The network was defined by a static route.
C . The network was learned via IBGP.
D . The network was learned via EBGP.
E . The network was originated via a network or aggregate command.
-
What is the default BGP scanner time?()
A . 10 minutes
B . 5 minutes
C . 120 seconds
D . 60 seconds
E . 30 minute
-
Refer to the exhibit. Routers RTA and RTB are running BGP but the session is active. Whatcommand needs to be added to establish the BGP session?()https://assets.asklib.com/images/image2/2018072611241650637.jpg
A . ip route 10.10.10.1 255.255.255.255 s0/0 ip route 10.10.10.1 255.255.255.255 s0/1
B . network 10.10.10.0
C . no synchronization
D . neighbor 10.10.10.1 next-hop-self
-
What best explains the BGP route-reflector function?()
A . BGP route-reflector should be in forwarding path of data coming from its clients
B . BGP route-reflector does not have to be in the forwarding path of data coming from its clients
C . BGP route-reflector will stop reflecting the routes if they’re not directly-connected clients
D . None of the above
-
Above is the output from show ip bgp neighbors command. What is line 21 stating about the BGP connection?()https://assets.asklib.com/images/image2/2018073013422864709.jpg
A . the number of consecutive TCP connections to the specified remote neig hbor
B . the number of total TCP connections that the router has
C . the number of times the router has established a TCP connection
D . the number of neighbors that the router ha
-
What are the mandatory, well-known BGP attributes?()
A . origin,AS-path,next-hop
B . AS-path,origin,MED
C . AS-path,origin,weight
D . AS-path,weight,MED
-
Which one of the following statements about BGP is FALSE?()
A . BGP uses TCP port 179.
B . BGP ensures reliability of updates by using the reliable transport services of TCP.
C . The network command with the mask option never insta lls a prefix into the BGP table unless there is a matching prefix exists in the IP route table.
D . A TCP connection is required before exchanging updates.
E . BGPuses notification and the update messages to establish and maintain the BGP neighbor relati onship.
-
If a metric is not specified for routes that are redistributed into OSPF, the defaul t metric that is assigned to the routes is 20, except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes?()
A . 200
B . 0
C . 1
D . 10
-
In BGP routing, what does the rule of synchronization mean?()
A . A BGP router can only advertise an EBGP learned route, provided that the route is an IGP route in the routing table.
B . A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route in the routing table.
C . A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route that is not in the routing table.
D . A BGP router can only advertise an EBGP learned route, provided that the route is a metric of 0 in the BGP table.
-
Router R1, in ASN 11, learns a BGP route from BGP peer R22 in ASN 22. R1 and then uses BGP to advertise the route to R2, also in ASN 11. What ASNs would you see in the BGP table on R2 for this route?()
A . 22
B . 11
C . 1
D . None
-
The above bgp configuration has what effect on the configured router?()
A . Allows incoming TCP connections destined to port 179
B . Allows incoming TCP connections sourced from port 179
C . Allows incoming TCP connections from 1.1.1.1 and destined to,or sourced from port 179
D . Allows incoming TCP connections from 1.1.1.1 that are destined to port 179
E . Allows incoming TCP connections from 1.1.1.1 that are sourced from port 179
-
Which command is used to view IPv6 parameters related to the BGP process?()
A . show ip bgp ipv6
B . show protocols ipv6
C . show ipv6 bgp
D . show bgp ipv6
-
What are the mandatory,well-known BGP attributes?()
A . origin,AS-path,next-hop
B . AS-path,origin,MED
C . AS-path,origin,weight
D . AS-path,weight,MED
-
The following output, taken from a show ip bgp command on Router R1, lists two neighbors. In what BGP neighbor state is neighbor 1.1.1.1?()Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/DownState/PfxRcd1.1.1.1 4 1 60 61 26 0 0 00:45:0102.2.2.2 4 3 153 159 26 0 0 00:38:131
A. Idle
B. Opensent
C. Active
D. Established