You have a print server that runs Windows Server 2003 Service Pack 2 (SP2). You need to receive a notification each time a document fails to print. What should you do? （）
A . From the Performance console, create an alert.
B . From the Event Viewer console, create a new filter.
C . From the Printer Server properties, modify the Advanced settings.
D . From the Services console, enable and configure the Messenger service.
-
You have a single server that has a Server Core Installation of Windows Server 2012 R2. How would you install the graphical user interface （GUI） to this server？（）
A . You should use Windows PowerShell to run the Enable-NetFirewallRule command.
B . You should use Windows PowerShell to run the Add-WindowsPackage command.
C . You should use Windows PowerShell to run the Install-WindowsFeature command.
D . You should use Server Manager console on to add the User Interfaces.
E . You should use Server Manager console to add the Infrastructure feature.
F . You should use Server Manager console to add the Windows feature.
-
Your company runs Remote Desktop Services. You have a Remote Desktop Session Host (RD Session Host) server. You need to ensure that remote desktop users can print only to the printers that are installed on the RD Session Host server. What should you do?（）
A . Enable the Do not allow client printer redirection Group Policy setting.
B . Disable the Do not allow client printer redirection Group Policy setting.
C . Enable the Do not set default client printer to be default printer in a session Group Policy setting.
D . Disable the Do not set default client printer to be default printer in a session Group Policy setting.
-
You have a file server that runs Windows Server 2008. You configure quotas on the server. You need to view each users quota usage on a per folder basis. What should you do？（）
A . From File Server Resource Manager， create a File Screen
B . From File Server Resource Manager， create a Storage Management report.
C . From the command prompt， run dirquota.exe quota list.
D . From the properties of each volume， review the Quota Entries list.
-
You have a server that runs Windows Server 2008. You need to configure the server as a VPN server. What should you installed on the server（）？
A . Windows Deployment Serivces role and Deployment Server role service
B . Windows Deployment Services role and Deployment Transport Role Service
C . Network Policy and Access Services role and Routing and Remote Access Services role service.
D . Network Policy and Access Services role and Routing and Host Credential Authorization Protocolr ole service.
-
You have a print server that runs Windows Server 2003 Service Pack 2 (SP2). You need to create a report of all the printers that are on the server and the drivers that they use. What should you do?（）
A . Open The Printers and Faxes control panel applet and select the details view. Take a screen capture of the Printers and Faxes window.
B . Run the command %systemroot%\system32\net.exe share > printers.txt.
C . Run the command cscript %systemroot%\system32\prnmngr.vbs –l > printers.txt.
D . Run the command cscript %systemroot%\system32\prnport.vbs -l > printers.txt.
-
You have a hosted Exchange organization.All servers in the organization have Exchange Server 2010 Service Pack 1 （SP1） installed.You need to group a set of users for administrative delegation. What should you create？（）
A . a managed folder mailbox policy
B . a new distribution group
C . a new management role
D . a new role assignment policy
-
You have a server that runs Windows Server 2003 Service Pack 2 (SP2).You need to compare the current security settings of the server to a security template. Which tool should you use?（）
A . Security Templates snap-in
B . Group Policy Management Console
C . Security Configuration and Analysis snap-in
D . Microsoft Baseline Security Analyzer (MBSA)
-
You have a computer that runs Windows 7. Your network contains a VPN server that runs Windows Server2008. You need to authenticate to the VPN server by using a smart card. Which authentication settingshould you choose?（）
A . CHAP
B . EAP
C . MS-CHAP v2
D . P.AP
-
You have a server that runs windows server 2008. You need to configure the server as a VPN server. What should you install on the server?（）
A . Windows deployment services role and deployment server role service.
B . Windows deployment services role and deployment transport role service.
C . Network policy and access services role and routing and remote access services role service.
D . Network policy and access services and host credential authorization protocol role service.
-
You have a file server that runs Windows Server 2008 R2.You configure quotas on the server.You need to view each user¯s quota usage on a per folder basis What should you do?（）
A . From File Server Resource Manager, create a File Screen.
B . From File Server Resource Manager, create a Storage Management report.
C . From the command prompt, run dirquota.exe quota list.
D . From the properties of each volume, review the Quota Entries list.
-
You have a file server that runs Windows Server 2008 R2.You configure quotas on the server.You need to view each users quota usage on a per folder basis.What should you do？（）
A . From File Server Resource Manager, create a File Screen.
B . From File Server Resource Manager, create a Storage Management report.
C . From the command prompt, run dirquota.exe quota list.
D . From the properties of each volume, review the Quota Entries list.
-
You have a DHCP server that runs Windows Server 2008. You need to reduce the size of the DHCP database. What should you do？（）
A . From the DHCP snap-in， reconcile the database
B . From the folder that contains the DHCP database， run jetpack.exe dhcp.db temp.mdb
C . From the properties of the dhcp.mdb file， enabled the File is ready for archiving attribute.
D . From the properties of the dhcp.mdb file， enable the Compress contents to save diskspace attribute
-
You have a server that runs windows server 2008 you need to configure the server as a VPN server. What should you install on the server?（）
A . Windows deployment Services role and deployment server role service.
B . Windows deployment services role and deployment transport role service.
C . Network policy and access services role and routing and remote access services role service.
D . Network policy and access services and host credential authorization protocol role service.
-
You have a Exchange 2003 environment.You add a Exchange server 2010 to your system. How do you make sure the new server handles the e-mail address policy？（）
A . Use Set-EmailAddressPolicy cmdlet
B . Use Update-EmailAddressPolicy cmdlet
C . Use New-EmailAddressPolicy cmdlet
D . Use Remove-EmailAddressPolicy cmdlet
-
You have a DNS server that runs Windows Server 2003 Service Pack 2 （SP2）. You need to see when the server receives a dynamic update in real time. What should you do？（）
A . From the System Monitor snap-in， add a new counter.
B . From Task Manager， add a column to the Networking tab.
C . From the Performance Logs and Alerts snap-in， create a new counter log.
D . From the DNS snap-in， open the DNS server properties and configure the Monitoring settings.
-
You have a server named Server 1.Server1 runs Windows Server 2012 R2. Server1 has a thin provisioned disk named Disk1.You need to expand Disk1.Which two actions should you perform？（）
A . From File and Storage Services， extend Disk1
B . From File and Storage Services， add a physical disk to the storage pool
C . From Disk Management， extend the volume
D . From Disk Management， delete the volume， create a new volume， and then format the volume
E . From File and Storage Services， detach Disk1
-
You have a server that runs Windows Server 2003 Service Pack 2 （SP2）. You need to compare the current security settings of the server to a security template. Which tool should you use？（）
A . Security Templates snap-in
B . Group Policy Management Console
C . Security Configuration and Analysis snap-in
D . Microsoft Baseline Security Analyzer （MBSA）
-
You have a server that runs Windows Server 2008. The server has the Windows Server virtualization role service installed. You need to merge a differencing disk and a parent disk. What should you do？（）
A . Edit the parent disk.
B . Inspect the parent disk.
C . Edit the differencing disk.
D . Inspect the differencing disk.
-
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2).Sh
You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Shadow Copies is enabled for all volumes by using the default settings.Server1 is configured as shown in the following table.You need to provide at least 10 GB of free space on volume D. You must achieve this goal without movingthe contents of the shared folders.What should you do？ （）
<img src='https://img2.soutiyun.com/shangxueba/ask/17130001-17133000/17131255/b43fec088061881c7fbb1570379e8e03.jpg' />
A. Modify the Disk Quota settings.
B. Modify the virtual memory setting.
C. Modify the Shadow Copies settings.
D. Modify the Caching settings for all shared folders.
-
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2). Server
You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 runs acustom application.Users report that the performance of Server1 has decreased significantly during the last 30 minutes.You need to identify the current processor and memory usage for each process running on Server1.Which tool should you use？ （）
A. Event Viewer
B. Task Manager
C. Query Process
D. System Configuration Utility
-
You have a stand-alone server named Server1 that runs Windows Server 2003 Service Pack 2 （
You have a stand-alone server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).A user named User1 is a member of the Administrators group on Server1.User1 attempts to log on to Server1 and receives the following error message.Other members of the Administrators group can log on to Server1.You need to ensure that User1 can log on to Server1.What should you do？ （）
<img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/946f8ae51ec01aa0f089b9f4e1430061.jpg' />
A. From the properties of the User1 account, modify the Session settings.
B. From the properties of the User1 account, modify Environment settings.
C. From the local security policy on Computer1, modify the Deny log on locally setting.
D. From the local security policy on Server1, modify the Impersonate a client after authentication setting.
-
Your company network consists of a single Active Directory domain named The network has a print server running Windows 2003 Server. A single printer is installed on the print server. Technicians in the IT Support department have the necessary permissions to manage printers on the print server.You are a member of the Domain Admins group.A user in the Accounts department reports that his documents are not printing. A technician named John examines the print queue and finds a list of documents waiting to be printed. John tries to delete the documents from the queue but is unsuccessful.You need to enable users to successfully print.What should you do？（）
A. Install a new print device. Reconfigure the printer to send print jobs to the new print device.
B. Stop and restart the Print Spooler service on the print server. Instruct users to resubmit their print jobs.
C. Install a second instance of the printer. Configure the print queue to hold mismatched documents. Redirect the original printer to the new printer.
D. Install a second instance of the printer. Delete the original printer. Instruct users to resubmit their print jobs.
-
From your Windows 2000 Professional computer, you need to print from a 16-bit accounting application to a network printer named Printer02. Printer02 is attached to a print server named PrtSrv. The accounting application allows you to print only to a local LPT port.
You currently have two printers attached to your local LPT1 and LPT2 ports. You need to be able to print to the network printer and to both local printers. You install the driver for the network printer on your computer.
What must you do next to enable printing on the network printer？
A．Create a new local printer port named PrtSrv\Printer02, and configure the printer to use the new port.
B．Create a new local printer port named PrtSrv\Printer02. In the properties for the new port, select the option to print directly to the printer. Configure the printer to use the new port.
C．Run thenet use Lpt3: \\PrtSrv\Printer02command.
D．Run thenet print\\PrtSrv\Printer02command.
-
You have a stand-alone file server that runs Windows Server 2003 Service Pack 2 （SP2).You
You have a stand-alone file server that runs Windows Server 2003 Service Pack 2 (SP2).You create an account named Admin1 and add it to the Power Users group.You attempt to log on to the server by using the Admin1 account and receive the following message: Thelocal policy of this system does not permit you to log on interactively.”You review the security settings as shown in the exhibit. (Click the Exhibit button.)You need to ensure that the Admin1 account can log on to the console of the server.What should you do？ （）
<img src='https://img2.soutiyun.com/shangxueba/ask/17130001-17133000/17131603/5c12eae5fffeb52cf285e56ba78f801d.jpg' />
A. Add the Admin1 account to the Administrators group.
B. Add the Admin1 account to the Allow log on locally policy.
C. Remove the Admin1 account from the Users group.
D. Remove the Users group from the Deny log on locally policy.
