-
Company.com has crated a process application monitor for an application that is initiated by a "c" Shell script. The application monitor is not functioning as designed. What could be the issue with eh application monitor？（）
A . A process monitor cannot monitor an application started by a shell.
B . For process monitors to function correctly， they must use the "korn" shell.
C . A custom monitor cannot de3termine the status of applications started by shell scripts.
D . The process monitor script is not existing with a zero return code after checking the status of the application.
-
he network administrator is trying to add Switch1 to the network， but the 802.1Q trunk is not coming up. Switch1 was previously tested in the laboratory and its trunk configuration worked fine. What are three possible causes of this problem？（）
A . The trunking configuration mode on Switch1 is set to Off.
B . The trunking configuration mode on the other end is set to On.
C . The trunking configuration mode on the other end is set to Desirable.
D . Cisco Discovery Protocol is not running on the other end.
E . There is a VTP domain name mismatch.
F . Switch1 does not support 802.1Q
-
The network administrator is trying to add Switch1 to the network， but the 802.1Q trunk is not coming up. Switch1 was previously tested in the laboratory and its trunk configuration worked fine. What are three possible causes of this problem？（）
A . The trunking configuration mode on Switch1 is set to Off.
B . The trunking configuration mode on the other end is set to On.
C . The trunking configuration mode on the other end is set to Desirable.
D . Cisco Discovery Protocol is not running on the other end.
E . There is a VTP domain name mismatch.
F . Switch1 does not support 802.1Q
-
Which three of these statements regarding 802.1Q trunking are correct？（）
A . 802.1Q native VLAN frames are untagged by default.
B . 802.1Q trunking ports can also be secure ports.
C . 802.1Q trunks can use 10 Mb/s Ethernet interfaces.
D . 802.1Q trunks require full-duplex， point-to-point connectivity.
E . 802.1Q trunks should have native VLANs that are the same at both ends.
-
The Company core switches use 802.1Q trunks to connect to each other. How does 802.1Q trunking keep track of multiple VLANs？ （）
A . It tags the data frame with VLAN information and recalculates the CRC value
B . It encapsulates the data frame with a new header and frame check sequence
C . It modifies the port index of a data frame to indicate the VLAN
D . It adds a new header containing the VLAN ID to the data frame
E . None of the other alternatives apply
-
https://assets.asklib.com/images/image2/2018073111514791006.jpgAssume session is an HttpSession， and is not referenced anywhere else in ServletA. Which two changes， taken together， ensure that value is equal to “Hello” on line 23？ （）
A . A
B . B
C . C
D . D
E . E
-
Which three of these statements regarding 802.1Q trunking are correct?（）
A . 802.1Q native VLAN frames are untagged by default.
B . 802.1Q trunking ports can also be secure ports.
C . 802.1Q trunks can use 10 Mb/s Ethernet interfaces.
D . 802.1Q trunks require full-duplex, point-to-point connectivity.
E . 802.1Q trunks should have native VLANs that are the same at both ends.
-
The network administrator is trying to add Switch1 to the network， but the 802.1Q trunk is not coming up. Switch1 was previously tested in the laboratory and its trunk configuration worked fine. What are three possible causes of this problem？ （）
A . The trunking configuration mode on Switch1 is set to Off.
B . The trunking configuration mode on the other end is set to On.
C . The trunking configuration mode on the other end is set to Desirable.
D . Cisco Discovery Protocol is not running on the other end.
E . There is a VTP domain name mismatch.
F . Switch1 does not support 802.1Q.
-
Which commands, when used together, would create an 802.1Q link?（）
A . Switch(vlan)# mode trunk
B . Switch(config)# switchport access mode trunk
C . Switch(config-if)# switchport mode trunk
D . Switch(config-if)# switchport trunk encapsulation dot1q
E . Switch(config)# switchport access mode 1
F . Switch(vlan)# trunk encapsulation dot1q
-
某Trunk端口接收到数据帧时如果该帧不包含802.1Q TAG，则会如何处理？（）
A、将打上该端口的 PVID
B、不做处理，直接转发
C、丢弃
D、将打上该端口的 VLAN ID
-
Which statements about 802.1Q trunking in Secure Network Foundation Design Guide for Single Site Deployments are correct？（）
A . The Cisco Control VLAN carries only Layer 2 control traffic
B . 802.1Q trunking is used between the access switch and the router
C . There is no 802.1Q trunking used in these designs
D . When 802.1Q trunks are configured， they are also called Native VLANs
E . Trunking Ensures that traffic from only one VLAN is carried on that trunk
-
The core Company switches are configured to use 802.1Q trunks. Which three statements are correct with regard to the IEEE 802.1Q standard？（）
A . The IEEE 802.1Q frame format adds a 4 byte field to a Ethernet frame
B . The packet is encapsulated with a 26 byte header and a 4 byte FCS
C . The protocol uses point-to-multipoint connectivity
D . The protocol uses point-to-point connectivity
E . The IEEE 802.1Q frame uses multicast destination of 0x01-00-0c-00-00
F . The IEEE 802.1Q frame retains the original MAC destination addre
-
An 802.1x client cannot authenticate to an autonomous access point configured for multiple vlans. the native vlan does not have an ssid configured. Which one of the following links being down would prevent the clients from authenticating？（）
A . between the radius and the access point
B . between the client’s vlan and the wlse
C . between the native vlan and the wlse
D . between the client’s vlan and the radiu
-
When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）
A . All defined VLANs are allowed on the trunk by default.
B . Each VLAN, or VLAN range, that is specified with the switchport mode command.
C . Each VLAN, or VLAN range, that is specified with the vtp domain command.
D . Each VLAN, or VLAN range, that is specified with the vlan database command.
-
Which is NOT an XPage feature？（）
A . A built in DXL editor
B . DWA emulation
C . Calculated view filtering
D . Built in asynchronousjavascript and XML
-
An 802.1X client cannot authenticate to an autonomous access point configured for multiple VLANs. The native VLAN does not have an SSID configured. Which one of the following links being down would prevent the clients from authenticating？（）
A . between the RADIUS and the access point
B . between the client’s VLAN and the WLSE
C . between the native VLAN and the WLSE
D . between the client’s VLAN and the RADIUS
-
You need to connect two Company core switches via an ISL trunk. Which statement is true regarding the configuration of ISL trunks？ （）
A . A Catalyst switch cannot have ISL and IEEE 802.1q trunks enabled.
B . All Catalyst switches support ISL trunking.
C . A Catalyst switch will report giants if one side is configured for ISL while the other side is not.
D . ISL trunking requires that native VLANs match.
E . None of the other alternatives apply
-
Which is NOT a part of an anchor（）.
A . Bill
B . Devil's claw
C . Palm
D . Crow
-
An 802.1Q trunk is not coming up between two switches. The ports on both switches are configured as "switchport mode desirable." Assuming that there is no physical issue， choose two possible causes.（）
A . Incorrect VTP domain
B . Incorrect VTP password
C . Incorrect VTP mode
D . Incorrect VTP configuration revisio
-
Byron is not a (an) :
-
Which is NOT an advantage of LLC？
A．Limited liability
B．Avoiding double taxation
C．Easier access to stock market
D．Less-rigid profit allocation
-
Their mother is not an English teacher.
A．True
B．False
-
–Looking after a baby is not an easy job, is it？
–No, it isn't.()
对
错
