-
A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?()
A . In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
B . In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
C . In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
D . In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.
-
What must be done to make a shared tape drive highly available?()
A . Ensure the rmt numbers are unique per node.
B . Nothing,because HACMP manages the state of the tape drive.
C . Nothing,because highly available tape devices are not supported.
D . Ensure that the tape device is in a defined state after system startup.
-
To enable a tty port to be used for a cu session what must be done to the system?()
A . smit tty; take the defaults and create the desired tty
B . In the /etc/uucp Devices add a line similar to: Direct ttyX - 9600 direct
C . Install bos.net.uucp and the first available tty will be configured for use by a cu session
D . Run the Asynchronous Terminal Emulation (ATE) program and it will configure a tty port for a cu sessio
-
What we have done is far from()
A . satisfactory
B . satisfied
C . satisfaction
D . satisfy
-
Company.com has an application that requires a serial connection for Electronic Data Interchange. What must be done to integrator the serial connection into an HACMP cluster?()
A . Use an RS3232/422 serial Y cable.
B . Alter the device settings to 9600 8/n/1 xon/xoff.
C . Use a network based terminal server for the serial connection.
D . Nothing because HACMP does not support native serial connection fallovers.
-
Company.com wants to reassign a host bus adapter (HBA) from one partition to another to handle increased I/O workload on that partition. What needs to be done to dynamically move the card?()
A . Use the rmdev command to remove the card from the current partition before doing the DLPAR process.
B . Take the source partition down and do the DLPAR function on the target partition.
C . Assign the card to the required section of the target partition and run cfgmgr.
D . Dynamically remove the card from the source and add to target profile then reactivate the target profile.
-
Speed must be regulated()no damage is done to the wharf.
A . in order to
B . so as
C . so that
D . such that
-
Since HTTP is one of the most common protocols used in the internet, what should be done at a firewall level to ensure thatthe protocol is being used correctly? ()
A . Ensure that a stateful firewall allows only HTTP traffic destined for valid web server IP addresses.
B . Ensure that a firewall has SYN flood and DDoS protection applied specifically for valid web servers.
C . Ensure that your firewall enforces HTTP protocol compliance to ensure that only valid flows are allowed inand outof your network.
D . Ensure that HTTP is always authenticated.
E . Ensure that your web server is in a different zone than your backend servers such as SQL and DNS.
-
The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an LPAR. The operator ran thecfgmgr command expecting to see 2 processors after that, but did not see them. What action must be done to apply the changes?()
A . Reboot AIX within the LPAR.
B . Run cfgmgr against the device sys0.
C . Shutdown and then activate the default_profile.
D . Ensure the RSCT daemon is operative and run cfgmgr again.
-
Refer to the exhibit. What must be done on router RTA to ensure that EIGRP works effectively in a Frame Relay multipoint environment?()https://assets.asklib.com/images/image2/2018073108533077621.png
A . Issue the command bandwidth 224 on the physical interface.
B . Issue the command bandwidth 56 on the physical interface.
C . Issue the command bandwidth 224 on each subinterface.
D . Issue the command bandwidth 56 on each subinterface.
-
() must be done to solve this problem.
A . Everything
B . Something
C . Anything
-
The loading of the ship must be done in accordance with().
A . the ship’s instructions
B . the terminal’s instructions
C . the port captain’s instructions
D . the charterer’s instructio
-
The customer forgot the admin password for the Storage Manager and had access denied to the storage. No additional admin accounts have been created. What should be done to access the storage again()
A . access the storage through the serial port and change the password for the admin account
B . log a call to IBM support
C . log in to the HMC and open a browser; no password is required
D . download a script from the IBM website and reset the password with the superuser account
-
You have a custom button, with should have a Property "IsActive", one must be able to bind this Property on a class Property.()
A . Dependency Property
B . INotifyPropertyChanged
C . net Property
-
An administrator suspects problems on a SCSI hard disk,but upon running diagnostics,no errors were found. What must be done to check the condition of the drive?()
A . Run diag and select the ‘Certify Media’ task.
B . Perform a read and write test on the disk and monitor errorlog.
C . Update the disk firmware to the latest level and monitor errorlog.
D . Format the disk to ensure bad blocks are omitted from the disk layout.
-
An administrator suspects problems on a SCSI hard disk, but upon running diagnostics, no errors were found. What must be done to check the condition of the drive?()
A . Run diag and select the 'Certify Media' task.
B . Perform a read and write test on the disk and monitor errorlog.
C . Update the disk firmware to the latest level and monitor errorlog.
D . Format the disk to ensure bad blocks are omitted from the disk layout.
-
An administrator suspects problems on a SCSI hard disk, but upon running diagnostics, no errors were found. What must be done to check the condition of the drive?()
A . Run diag and select the ’Certify Media’ task.
B . Perform a read and write test on the disk and monitor errorlog.
C . Update the disk firmware to the latest level and monitor errorlog.
D . Format the disk to ensure bad blocks are omitted from the disk layout.
-
What you have done will not have your fame.
-
what did you have done this afternoon?和 what have you done at this afternoon?有什么区别?
-
【填空题】We should be grateful to them in return for ____ they have done for us. 答案:
what
-
Look what you have done! You _______ more careful!A、may be
B、had to be
C、would be
D、should have been
-
The use of nuclear power has already spread all over the world.(1), scientists still have not agreed(2)what should be done with the large amounts of waste material that(3)to increase every year. Most waste materials are(4)of simply by placing them somewhere. But nuclear waste must be(5)with great care. It(6)dangerous radiation and it will continue to be(7)for hundreds, thousands, even millions of years.
How should we get(8)of such waste material in such a way(9)it will not harm the(10)? Where can we(11)distribute it? One idea is to put this radioactive waste inside a thick container, which is(12)dropped to the deep bottom of the ocean.(13)some scientists believe that this way of(14)nuclear waste could kill fish and other living things in the oceans or interfere(15)their growth. Another way to(16)nuclear waste is to send it into space, to the sun,(17)it would be burned. Other scientists suggest that this polluting material be(18)thousands of meters under the earth’s surface. Such underground areas must be free(19)possible earthquakes. Advances are being made. But it may still be many years(20)this problem could be finally settled.
1. A .Moreover B However C Therefore D Otherwise
2. A .on
B. with
C. to
D. in
3. A. incline
B. start
C. tend
D. keep
4. A .drained
B. dumped
C. discharged
D. disposed
5. A .dealt
B. handled
C. coped
D. processed
6. A .drops off
B. gives off
C. leaves off
D. sets off
7. A .efficient
B. unfavorable
C. deadly
D. painful
8. A. touch
B. hold
C. grasp
D. rid
9. A. so
B. which
C. that
D. thus
10. A. environment
B. situation
C. location
D. residence
11. A .reasonably
B. rationally
C. regularly
D. safely
12. A .then
B. even
C. ever
D. only
13. A .And
B. But
C. Still
D. Thereby
14. A. scattering
B. preserving
C. containing
D. discarding
15. A. in
B. with
C. against
D. at
16. A. remove
B. deliver
C. transport
D. spread
17. A. where
B. when
C. there
D. while
18. A. covered
B. deposited
C. buried
D. reserved
19. A. from
B.of
C. for
D. about
20. A. until
B. after
C. before
D. unless
-
() they have done too much for the chance to come here, they must work hard.
A.Since that
B.For
C.As
D.Because of
-
Suppose that the one-year U.S. interest rate is 13% and the one-year Swiss interest rate is 2%. If the current spot rate is $1.40 per Swiss franc, what must the one-year forward rate () be according t
A.1.246
B.1.330
C.1.554
D.2.100