-
Refer to the exhibit. What will Router1 do when it receives the data frame shown?()https://assets.asklib.com/images/image2/2018072316231376740.jpg
A . Router1 will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965.
B . Router1 will strip off the source IP address and replace it with the IP address 192.168.40.1.
C . Router1 will strip off the destination MAC address and replace it with the MAC address 0000.0c07.4320.
D . Router1 will strip off the destination IP address and replace it with the IP address of 192.168.40.1.
E . Router1 will forward the data packet out interface FastEthernet0/1.
F . Router1 will forward the data packet out interface FastEthernet0/2.
-
A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network?()
A . an OSPF update for network 192.168.0.0/16
B . a static router to network 192.168.10.0/24
C . a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
D . a RIP update for network 192.168.10.0/24
E . a directly connected interface with an address of 192.168.10.254/24
F . a default route with a next hop address of 192.168.10.1
-
The Red Hazel Company has received its router from Cisco and is ready to install Cisco Unified CallManager Express. Where will the company find its Cisco Unified CallManager Express software?()
A . Cisco.com
B . embedded in Flash on the hardware
C . e-mail download from Cisco
D . on a CD-ROM included with installation materials
E . only from a Cisco SE, due to special licensing consideratio
-
Choose two commands that are required to enable multicast on a router, when it is known that the receivers use a specific functionality of IGMPv3.()
A . ip pim rp-address
B . ip pim ssm
C . ip pim sparse-mode
D . ip pim passive
-
A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table?(Choose all that apply.)()
A . RIP route 10.1.2.0/24
B . EIGRP route 10.1.2.0/24
C . RIP route 10.1.0.0/16
D . OSPF route 10.1.0.0/16
E . RIP route 10.0.0.0/16
F . OSPF route 10.1.2.0/24
-
A router receives a packet on interface 172.16.45.66/26. The source IP of the packet is 172.16.45.127/26 and the destination is 172.16.46.191/26.How will the router handle the packet?()
A . The destination is a host on another subnet, so the router will not forward the packet.
B . The destination is a host on the same subnet, so the router will forward the packet.
C . The destination is a broadcast address, so the router will not forward the packet.
D . The destination is a network address, so the router will forward the packet.
-
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?()
A . an OSPF update for network 192.168.0.0/16
B . a static router to network 192.168.10.0/24
C . a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
D . a RIP update for network 192.168.10.0/24
E . a directly connected interface with an address of 192.168.10.254/24
F . a default route with a next hop address of 192.168.10.1
-
Which two commands are required to enable multicast on a router, knowing that the receivers only support IGMPv2?()
A . ip pim rp-address
B . ip pim ssm
C . ip pim sparse-mode
D . ip pim passive
-
Which site-to-site VPN solution allows Cisco routers, PIX Firewalls, and Cisco hardware clients toact as remote VPN clients in order to receive predefined security policies and configuration parameters from the VPN headend at the central site?()
A . Easy VPN
B . GRE tunneling
C . Virtual Tunnel Interfaces
D . Dynamic Multipoint VPN
E . Group Encrypted Transport VPN
-
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()
A . Source-Active Message
B . PIM Join
C . PIM Hello
D . MSDP Register
-
While logged into a router, you wish to see the RIP routing updates in real time as they are sent and received. Which command would you issue to see these updates?()
A . Show ip protocols
B . Show ip route rip
C . Debug ip rip
D . Debug ip updates
E . Debug ip transactio
-
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message knowing that the MSDP router is also configured as an RP for the PIM domain?()
A . Source-Active Message
B . PIM Join
C . PIM Hello
D . MSDP Register
-
During the IPv6 autoconfiguration, what does the device append to the 64- bit prefix that it receives from the router to create its IPv6 address?()
A . a pseudora ndom generated number
B . its locally configured IPv4 address
C . the DHCP - supplied device ID
D . its MAC addre
-
Which routing protocol will continue to receive and process routing updates f rom neighbors after the passive - interface router configuration command is entered?()
A . EIGRP
B . RIP
C . OSPF
D . IS - IS
-
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network()。
A . a directly connected interface with an address of 192.168.10.254/24
B . a static route to network 192.168.10.0/24
C . a RIP update for network 192.168.10.0/24
D . an OSPF update for network 192.168.0.0/16
E . a default route with a next hop address of 192.168.10.1
F . a static route to network 192.168.10.0/24 with a local serial interface configured as the next ho
-
A network administrator receives an error message while tring to configure the Ethernet interface of a router with IP address 10.24.24.24/29.which statement explains the reason for this issue?()
A . The address is a broadcast address
B . The Ehernet interface is faulty
C . VLSM-capable routing protocols must be enable first on the router.
D . This address is a network address.
-
Which two commands are required to enable multicast on a router, knowing that the receivers only supports IGMPv2?()
A . IP PIM RP-address
B . IP PIM ssm
C . IP PIM Sparse-mode
D . IP PIM Passive
-
An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF?()
A . Ensure that an interface has been configured with an IP address
B . Ensure that IP classless is enabled
C . Ensure that the interfaces can ping their directly connected neighbors
D . Ensure that an interface has been configured with an IP address and is u
-
After attempting to telnet into a router, you are denied and you receive the error message "password required, but none set." What configuration changes will allow telnet access into this router?()
A .https://assets.asklib.com/images/image2/2018073013554218805.jpg
B .https://assets.asklib.com/images/image2/2018073013554875867.jpg
C .https://assets.asklib.com/images/image2/2018073013555890653.jpg
D .https://assets.asklib.com/images/image2/2018073013560739765.jpg
-
The routers named Testking1 and Testking2 are both configured with RIP only.What will happen in the event of Testking1 receiving a routing update that contains a higher cost path to a network already in its routing table?()
A . The update information will be added to the existing routing table.
B . The update information will replace the existing routing table entry.
C . The update will be ignored and thus no further action will occur.
D . The existing routing table entry will be purged from the routing table and all routers will attempt convergence.
-
The router receives a login request from a PPP over ATM client and examines the domain map for the client‘s domain. The router finds no entries currently configured within the domain map.What does the router do with the login request?()
A. The router rejects it.
B. The router tunnels it via L2TP.
C. The router authenticates it locally.
D. The default virtual router authenticates it.
-
Refer to the exhibit. What will Router1 do when it receives the data frame shown?()
<img src='https://img2.soutiyun.com/ask/uploadfile/2019-02-05/72ab8f6538ac9ce22dc27503a9f6be9f.jpg' />
A.Router1 will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965.
B.Router1 will strip off the source IP address and replace it with the IP address 192.168.40.1.
C.Router1 will strip off the destination MAC address and replace it with the MAC address 0000.0c07.4320.
D. Router1 will strip off the destination IP address and replace it with the IP address of 192.168.40.1.
E.Router1 will forward the data packet out interface FastEthernet0/1.
F.Router1 will forward the data packet out interface FastEthernet0/2.
-
() concerns a cycle of organizational activity : the acquisition of informat ion from one or more sources , the custodianship and the distribution of that information to those who need it , and its ul
A、 Acquisition management
B、 Information management
C、Distrbution management
D、 DeIetlon management
-
The ERX Edge Router responds toa received PPP over Ethernet Active Discovery Initiation(PADI) with which message type?()
A.PPPoE Active Discovery Offer
B.PPPoE Active Discovery Initiation
C.PPPoE Active Session Confirmation
D.PPPoE Active Session Acknowledgment