A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?()
A . Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
B . Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
C . Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
D . Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
-
On notification by Admiralty Notice to Mariners that a new edition of one of the books,or a new supplement to one,has been published,it should be obtained().
A、as soon as possible
B、prior to its publication
C、in advance of any possible accident
D、by means of other than airmails
-
A new network has been configured using OSPF as the routing protocol. With which network type will OSPF establish router adjacencies but not perform the DR/BDR election process?()
A . point-to-point
B . Backbone area 0
C . Broadcast multicast
D . Non-broadcast multi-access
E . The DR/BDR process is done for all interface type
-
You and a co-worker have established wireless communication directly between your wireless laptops. What type of wireless topology has been created?()
A . BSS
B . ESS
C . IBSS
D . SSID
-
You are in the process of creating a new application. This new application has to be able to read all data from a text file. What should you do?()
A .https://assets.asklib.com/images/image2/2018072715444624617.jpg
B .https://assets.asklib.com/images/image2/2018072715445068298.jpg
C .https://assets.asklib.com/images/image2/2018072715445464634.jpg
D .https://assets.asklib.com/images/image2/2018072715445747977.jpg
-
A new Aironet 1200 series AP has been installed in the Company WLAN. What happens when this device is connected to the LAN, with a default configuration?()
A . The access point will attempt to download an encryption key from the nearest wireless server.
B . The access point makes several attempts to get an IP address from the DHCP server. If the access point does not receive an address, it assigns itself the IP address 10.0.0.1 for 5 minutes.
C . The access point will attempt to connect to the nearest wireless server using LEAP authentication.
D . The access point requests an IP address from the DHCP server. If the access point does not receive an address, it continues to send requests indefinitely.
E . None of the other alternatives apply
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?()
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
The system administrator has determined that a new JFS log needs to be created on a different disk, in order to decrease an I/O bottleneck. Which of the following steps are the most correct?()
A . mklv -t jfslog -y LVname VGname 1 PVname logform /dev/LVname chfs -a log=/dev/LVname /filesystemname m ount and unmount filesystem
B . mklv -t jfslog -y LVname VGname PVname unmount filesystem vi /etc/filesystems, change entry for lv to point filesystem to new JFS log mount filesystem
C . mklvcopy -a jfslog -y LVname VGname 1 PVname chfs -a log=/dev/LVname /filesystemname unmount and mount file system
D . mklvcopy -t jfslog -y LVname VGname 1 PVname logform /dev/LVname vi /etc/filesystems, change entry for lv to point filesystem to new JFS log unmount and mount filesystem
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?()
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
The voice VLAN feature has been enabled on a new Company Catalyst switch port. What is the effect of this? ()
A . The CoS is trusted for 802.1P or 802.1Q tagged traffic.
B . PortFast is disabled on the port.
C . Port Security is automatically enabled on a voice VLAN port.
D . Untagged traffic is sent according to the default CoS priority of the port.
E . None of the other alternatives apply
-
SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?()
A . SLES does not perform well with DHCP
B . SLES was installed with the default host name of Linux
C . Virtual Network Resources are being used, which is not supported in a SLES environment
D . The SLES instance was installed in 32-bit mode, where 64-bit should have been selected
-
You have a computer that runs Windows 7. You mark a folder as Always available offline. You need to verifythat an offline copy of the folder has been created on the computer. What should you do?()
A . Open Sync Center and review the status.
B . Open Action Center and review any messages or issues.
C . Open Windows Mobile Device Center and review the status.
D . Open Network and Sharing Center and review the status for the local area connection.
-
An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?()
A . On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
B . On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
C . On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
D . On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
-
A new lightweight access point (LAP) has been installed in the Company WLAN. Which two statements correctly describe the association process between this LAP and a WLAN controller? ()
A . An access point will search for a controller using a broadcast address if using LWAPP Layer 2 and a unicast address if using LWAPP Layer 3 mode.
B . If multiple wireless controllers are detected by an access point, the controller with the fewest associated access points is chosen to associate with.
C . In order to associate in Layer 3 mode, the access point must have been preconfigured with an IP address.
D . Once an access point associates with a controller in LWAPP Layer 3 mode, it receives an IP address from the controller.
E . An access point first searches for a controller in LWAPP Layer 2 mode. If the search is not successful, the access point then attempts to locate a controller in LWAPP Layer 3 mode.
F . If multiple wireless controllers are detected by an access point, all of them will be used and traffic will be load balanced.
-
Which of these phases involves ensuring that a new solution has been integrated without disrupting the existing network? Select exactly 1 answer(s) from the following:()。
A . plan
B . prepare
C . operate
D . implement
-
An administrator is creating a new LPAR with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?()
A . 0
B . 1
C . 255
D . 256
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?()
A . Run ’mkdev’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
B . Run ’mkpath’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
C . Run ’chpath’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
D . Run ’cfgmgr’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?()
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
A library called contosobuisness.dll has been created and u need to accept it in a page.. all options had the
A . <%assembly TargetName="contosobuisness" %>
B . <%assembly ID="contosobuisness" %>
C . <%@ Assembly Name="contosobuisness" %>
D . <%assembly virtualpath="contosobuisness" %>
-
The old paper mill has been ________ to make way for a new shopping centre.
-
Once your answer has been verified, you will be prompted to_____your account number and create a new PIN.
A.place
B.offer
C.impose
D.enter
-
The new product has been a commercial success in the USA.
A.Right
B.Wrong
C.Doesn't say
-
The Internet has opened up a whole new online world for us to meet, chat and go where we ‘ve never been before.
But just as in face to face communication, there are some rules of behavior. that should be followed when on line. 56_________ If someone in the chat room is rude to you, you Imagine how you ‘d feel if you were in the other person ‘s shoes. For anything you ‘re about to send: ask yourself, ―Would I say this to the person ‘s face?‖ If th answer is no, rewrite and reread. 57_________
If someone in the chat room is rude to you, your instinct (本能) is to fire back in the same manner. But try not to do so. 58 _________ If someone in the chat room is rude to you, youIf it was caused by a disagreement with another member, try to fix the situation by politely discussing it. Remember to respect the beliefs and opinions of others in the chat room.
59__________ If someone in the chat room is rude to you, you Offer advice when asked by newcomers, as they may not be sure what to do or how to communicate. When someone makes a mistake, whether it ‘s a stupid question or an unnecessarily long answer, b e kind about it. If it ‘s a small mistake, you may not need to say anything. Even if you feel strongly about it, think twice before saying anything. Having good manners yourself doesn ‘t give you license to correct everyone else. 60_________ If someone in the chat room is rude to you, you At the same time, if you find you are wrong, be sure to correct yourself and apologize to those that you have offended. It is not polite to ask others personal questions such as their age, sex and marital status. Unless you know the person very well, and you are both comfortable with sharing personal information, don‘t ask such questions.
A. It ‘s natural that there some people who speak rudely or make mistakes online.
B. Repeat the process till you feel sure that you ‘d feel comfortable saying the words to the person‘s face.
C. Everyone was new to the network once.
D. The basic rule is simple: treat others in the same way you would want to be treated.
E. When you send short messages to a person online, you must say something beautiful to hear.
F. You should either ignore the person, or use your chat software to block their messages.
G. If you do decide to tell someone about a mistake, point it out politely.
56______
57______
58______
59______
60______
请帮忙给出每个问题的正确答案和分析,谢谢!
-
It has been said that the Acts provided a new course of action and did not merely requlate or enlarge an old one.
A.manage
B.control
C.revise
D.outset
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters.How should the administrator configure the disks?()
A.Run ‘mkdev‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
B.Run ‘mkpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
C.Run ‘chpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
D.Run ‘cfgmgr‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.