-
The step of a pilot ladder which prevents the ladder from twisting is the（）.
A . proof bar
B . shifting bar
C . long bar
D . spreader
-
Which step is required for recover from an instance failure？ （）
A . Start up only.
B . Restore needed data files， then start up.
C . Complete restore from backup， then start up.
D . Perform point in time recovery， then start up.
-
Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）
A . Set the SSID value in the client software to public.
B . Configure open authentication on the AP and the client.
C . Set the SSID value on the client to the SSID configured on the AP.
D . Configured MAC address filtering to permit the client to connect to the AP.
-
Which of the following steps is incorrect in the following sequence of enabling the ARCHIVELOG mode of a database？（）
A . Shut down the database.
B . Set the appropriate parameters in init.ora file.
C . Start the database in NOMOUNT state.
D . Issue the ALTER DATABASE ARCHIVELOG command.
E . Open the database.
F . Take a full closed backup.
-
Which step is designed to prompt a user to press or say a single-digit number to perform a specific function? （）
A . Menu
B . Get Digit String
C . Get Call Contact Info
D . Extended Get Digit String
-
Which of the following step libraries is included in the license for IPCC Express Standard? （）
A . ICM steps
B . e-mail steps
C . media steps
D . database ste
-
An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option?（）
A . The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel.
B . The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel.
C . The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks.
D . The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.
-
Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）
A . Set the SSID value in the client software to public.
B . Configure open authentication on the AP and the client.
C . Set the SSID value on the client to the SSID configured on the AP
D . Configure MAC address filtering to permit the client to connect to the AP
-
If the Call Redirect step sends a caller to a device that does not exist in the CallManager, which branch of the step is executed? （）
A . Busy
B . Invalid
C . Successful
D . Unsuccessfu
-
The C02 flooding system is actuated by a sequence of steps which are（）.
A . break glass，pull valve，break glass，pull cylinder control
B . sound evacuation alarm，pull handle
C . open bypass valve，break glass，pull handle
D . open stop valve，open control valve，trip alarm
-
Your boss at Certkiller .com wants you to clarify Oracle 10g. Which two steps are performed the first time any UPDATE statement is issued after the instance is started？（）
A . Creating the parse tree of the statement
B . Writing the modified data blocks to the data files
C . Writing the modified data to the archived redo log files
D . Updating the control file to indicate the most recent checkpoint
E . Updating the data file header to indicate the most recent checkpoint
F . Reading the blocks to database buffer cache if they are not already there
-
An alternator switchboard has a synchroscope and synchronizing lamps, if the synchroscope is broken, which of the steps listed is the most essential before an alternator can be paralleled with the bus （）
A . The breaker should be closed when one synchronizing lamp is dark and the other is bright
B . The breaker should be closed when both synchronizing lamps are bright
C . The frequency meter should be used to determine that the incoming alternator frequency is slightly higher than the bus
D . A portable phase sequence indicator must be used to verify the information from the lam
-
When recovering from a disaster, the backup and restore operation you use is similar to the export/import configuration procedure, with one additional step. Which additional step must you take when recovering from a disaster?（）
A . A new WebSphere profile is required to restore the configuration.
B . The restored system requires the IBM Tivoli Access Manager for e-business （TAMeb） JRTE to be manually configured against the WebSphere’s Java Runtime to allow the IBM Tivoli Federated Identity Manager （ITFIM） Runtime to function properly.
C . The ITFIM Domain needs to be created manually within the Integrated Solution Console.
D . The ITFIM Runtime instance needs to be re-registered with the TAMeb policy server by running the SvrSslCfg command.
-
When setting up a new store， which of the following steps is required in order to use the PasswordInvalidation feature？（）
A . The ChangePassword page needs to be implemented.
B . The password policy needs to be defined.
C . The account lockout policy needs to be defined.
D . The LoginTimeoutError view and ReLogonForm view need to be defined.
-
An administrator needs to replace a failed internal disk in a mirrored rootvg. Which of the following is one of the steps that must be followed（）
A . Deallocate rootvg mirror
B . Use hot replace manager
C . Break rootvg mirror
D . Deallocate LPs from failed disk
-
When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）
A . Generate a unique MAC address.
B . Run cfgmgr to create device special files.
C . Create a virtual device with "smitty vlan".
D . Add a virtual Ethernet adapter to the partition profile.
-
When possible，what is the FIRST step in fighting an engine fuel-pump fire which results from a broken fuel line?（）
A . Secure all engine room doors，hatches，and vents
B . Close the fuel line valve
C . Check the spread of the fire with foam
D . Cast the barge off the wharf
-
Which one is not included in the steps dealing with tourists’ complaint?
-
The final step in motivated sequence is the _______step, in which a speaker asks an audience to approve his or her proposal.
-
The final step in motivated sequence is the _______ step, in which a speaker asks an audience to approve his or her proposal.
-
Which is the correct arrangement of steps in argumentation?
-
Which of the following is the final step of the Decide Model for effective risk management and Aeronautical Decision Making? （ ）
-
There are several steps that can be taken, of which the chief one is to demand of all
There are several steps that can be taken, of which the chief one is to demand of all the organizations that exist with the declared objectives of safeguarding the interests of animals that they should declare clearly where they stand on violence towards people.
-
Which step is the process of deriving a list of physical components and their interconnections （） from the model of a digital system described in an HDL.
A．design entry
B．logic simulation
C．timing verification
D．Logic synthesis
-
Which of the following steps is necessary to add a new device driver to a Linux machine？()
A.Copy the device driver to the device driver directory.
B.Extend the Linux kernel by incorporating the device code.
C.Insert the device into the Linux system and allow the system to choose the device files from its device directory.
D.Insert the cd-rom with the device driver into the machine Linux will detect it and prompt you through installation.
