PPP验证失败后,将由Authenticate阶段转入什么阶段()。
Which PPP subprotocol negotiates authentication options?()
PPP验证成功后,将由Authenticate阶段转入什么阶段
在配置PPP验证方式为PAP时,下面哪些操作是必须的().
which command is used to enable CHAP authentication whit PAP as the fallback method on a serial interface?()
PPP协议中的PAP验证有什么特点:()。
PPP验证失败后,将由Authenticating阶段转入什么阶段().
在PPP协议中,PAP认证过程中需要建立()次握手.
当选择PAP作为PPP的验证协议时,将使用哪种类型的握手()。
PPP的认证协议一般有PAP、CHAP等。
PPP协议支持的认证方式有PAP和CHAP两种。
在PPP协议中,对PAP和CHAP验证描述正确的是().
以下是配置PPP认证时通过debug ppp authent ication得到的信息,请问该协议是几路握手?()
在PPP协议中,PPP验证成功后,将由Authenticate阶段转入Establish阶段。()
PPP验证成功后,将由Authenticate阶段转入什么阶段()
下面那条命令是把PPP的验证方式设置为PAP().
下列PPP协议中的CHAP与PAP的区别中,()是正确的。
客户的网络连接形如: HostA----GE0/0--MSR-1--S1/0-----WAN----S1/0--MSR-2--GE0/0----HostB 在两台路由器MSR-1和MSR-2的广域网接口S1/0上都只封装了PPP协议并配置IP地址。目前HostA 与HostB可以互相ping通。在MSR-1接口S1/0下增加命令ppp authentication-mode chap,然后对MSR-1的S1/0执行shutdown和undo shutdown操作。那么()
Which PPP subprotocol negotiates authentication options?()
PPP链路的建立包括三部分的内容,分别是:LCP协商、PAP和CHAP协商、NCP协商(典型的为IPCP)。
在配置PPP认证方式为PAP时,下面哪些操作是必须的?()
While troubleshooting a serial line problem, you enable ppp authentication debugging as shown below:Based on the command output above, what type of ‘handshake‘ was used for PPP authentication?()
PPP协议包括(LCP)(PAP/CHAP)(IPCP)三步()