-
Your computer connects to both an ad hoc wireless network and a wired network. You need to allow other wireless clients to access the wired network.
What should you do?()
https://assets.asklib.com/images/image2/2018073116270156354.jpg
A . A
B . B
C . C
D . D
-
When configuring cisco secure acs to support wireless eap authentication,which device must be configured as a aaa client?()
A . location appliance
B . controller-based access points
C . wireless clients
D . wireless control system
E . wireless controller
-
Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?()
A . Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC after AP1 issues an IGMP query.
B . Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC independent of AP1 multicast member status.
C . Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, provided that another client has already joined that multicast.
D . Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, regardless if any other clients have already joined that multicast.
-
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter, the status LED and activity LED arealternating on and off. What does this indicate?()
A . The client card is not associated to the network.
B . The client card has awakened from power-save mode.
C . The driver has been installed incorrectly.
D . The client card has failed.
-
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter,the status LED and activity LED arealternating on and off. What does this indicate?()
A . The client card is not associated to the network.
B . The client card has awakened from power-save mode.
C . The driver has been installed incorrectly.
D . The client card has failed.
-
On a cisco aironet 802.11 a/b/g wireless lan client adapter, the status led and activity led are alternating on and off. What does this indicate?()
A . the client card is not associated to the network.
B . the client card has awakened from power-save mode.
C . the driver has been installed incorrectly.
D . the client card has failed.
-
A developer is designing a web application that must support multiple interfaces,including: an XML web service for B2B HTML for web-based clients WML for wireless customers. Which designpattern provides a solution for this problem?()
A . Session Facade
B . Business Delegate
C . Data Access Object
D . Model-View-Controller
E . Chain of Responsibility
-
A consulting firm is locating 30 consultants at a client site for a nine-month project. What need does the firm have that can be met by a wireless solution?()
A . Providing a temporary network need
B . Ensuring secure presentations
C . Having freedom of movement within a network range
D . Augmenting an existing network
-
Which two benefits will a client see from adding a Wireless LAN Controller to their Smart Business Communications System?()
A . allow for guest access
B . increase connection speeds
C . add additional access points
D . network management with CLI
-
When configuring Cisco Secure ACS to support wireless EAP authentication,which device mustbeconfigured as a AAA client?()
A . Location Appliance
B . controller-based access points
C . wireless clients
D . Wireless Control System
E . wireless controller
-
Under which three conditions does a client initiate roaming between wireless cells in the Company WLAN? ()
A . The access point has broadcast too many SSIDs.
B . The wireless client has missed too many beacons from the access point.
C . The maximum data retry count, initiated by the wireless client, is exceeded.
D . The wireless client has reduced the data rate.
E . The access point has requested client reauthentication.
F . The wireless client has missed too many IAPP (Inter Access Point Protocol) updates.
-
When configuring Cisco Secure ACS to support wireless EAP authentication,which device must beconfigured as a AAA client?()
A . Location Appliance
B . controller-based access points
C . wireless clients
D . Wireless Control System
E . wireless controller
-
A developer is designing a web application that must support multiple interfaces, including: an XML web service for B2B HTML for web-based clients WML for wireless customers. Which designpattern provides a solution for this problem?()
A . Session Facade
B . Business Delegate
C . Data Access Object
D . Model-View-Controller
E . Chain of Responsibility
-
Which certification-based protocol is implemented for wireless QoS between an AP and a wireless client over RF media?()
A . WMM using DCF
B . WMM using EDCAF
C . 802.1e using DCF
D . 802.1e using EDCAF
-
Which wireless LAN design ensures that a mobile wireless client will not lose connectivity when moving from one access point to another?()
A . using adapters and access points manufactured by the same company
B . overlapping the wireless cell coverage by at least 10%
C . configuring all access points to use the same channel
D . utilizing MAC address filtering to allow the client MAC address to authenticate with the surrounding AP
-
Which explanation describes a wireless client IGMP multicast join request using a Cisco Unified Wireless Network v5.2 architecture of AP to WLAN controller?()
A . passed by the AP to its connected switch and then forwarded directly to the connected router,which creates an MGID table entry
B . passed by the AP to the WLAN controller and then forwarded to the source PIM-enabled router,which creates an MGID table entry
C . passed by the AP to the WLAN controller, which creates an MGID table entry before forwarding to the directly connected PIM-enabled router
D . passed by the AP to its connected switch and then forwarded to the rendezvous point router,which creates an MGID table entry
-
When configuring Cisco Secure ACS to support wireless EAP authentication, which device must be configured as a AAA client?()
A . Wireless Control System
B . wireless clients
C . wireless controllers
D . controller-based access points
E . Location Appliance
-
Which set of statements describes the correct order and process of a Company wireless user client associating with a wireless access point in the Company network? ()
A . 1. Access point sends probe request .2. Client sends probe response.3. Client initiates association.4. Access point accepts association.5. Client adds access point MAC address to association table.
B . 1. Client sends probe request.2. Access point sends probe response.3. Client initiates association.4. Access point accepts association.5. Access point adds client MAC address to association table.
C . 1. Client sends probe request.2. Access point sends probe response.3. Access point initiates association.4. Client accepts association.5. Access point adds client MAC address to association table.
D . 1. Access point sends probe request .2. Client sends probe response.3. Client initiates association.4. Access point accepts association.5. Access point adds client MAC address to association table.
E . 1. Client sends probe request.2. Access point sends probe response.3. Client initiates association.4. Access point accepts association.5. Client adds access point MAC address to association table.
F . None of the other alternatives apply.
-
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter,the status LED and activity LED are alternating on and off. What does this indicate?()
A . The client card has failed.
B . The client card is not associated to the network.
C . The driver has been installed incorrectly.
D . The client card has awakened from power-save mode.
-
On the Company wireless LAN, A client is searching for an access point (AP). What is the correct process order that this Company client and access point goes through in order to create a connection?()
A . association request/response, probe request/response, authentication request/response
B . association request/response, authentication request/response, probe request/response
C . probe request/response, authentication request/response, association request/response
D . probe request/response, association request/response, authentication request/response
E . None of the other alternatives apply
-
An LWAPP encapsulated packet is being sent from the Cisco WLC v5.2 to the AP for a wireless WMM client. Can the LWAPP frame be altered to change the resulting final WMM queue for transmission on an 802.11 client?()
A . Yes,by modifying the LWAPP frame header DSCP value in transit.
B . Yes,by modifying the LWAPP frame header 802.1p value in transit.
C . No,the WMM queue classification parameter is transported inside the LWAPP tunnel.
D . No,the WMM queue classification parameter is determined at the AP based on the original client IP header DSCP value.
-
Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?()
A . A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, and finally to all wireless clients of that Cisco WLC, via wireless multicast.
B . A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, and finally to all wireless clients of that Cisco WLC, via wireless unicast.
C . A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients via wireless multicast.
D . A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients via wireless multicast.
E . A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients via wireless unicast.
F . A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients via wireless unicast.
-
On the wireless LAN, A client is searching for an access point (AP). What is the correct processorder that this client and access point goes through in order to create a connection?()
A . association request/response, probe request/response, authentication request/response
B . association request/response, authentication request/response, probe request/response
C . probe request/response, authentication request/response, association request/response
D . probe request/response, association request/response, authentication request/response
E . None of the other alternatives apply
-
Which two wireless devices acts as a communication connection between the client and WLAN()
A . bridge
B . access point
C . wireless adaptor
D . Layer 3 switch
E . antenna