During extremely cold weather, while starting an engine, it turns too slowly and fails to startThis problem is most likely the result of ()
A diesel engine is turned at normal cranking speed, but fails to fireThis can occur from ()
A diesel engine is turned at normal cranking speed and no ignition occursThis could be the result of ()
Before engaging the turning gear and turning the diesel engine, which of the following operation should be done except ()
In a diesel engine, the time taken to heat the fuel particles, turn them into vapor, and bring about combustion is called ()
During maneuvering operations for a direct reversing large, low-speed, main propulsion diesel engine, which of the following actions is used to stop the shaft from turning prior to reversing the engine rotation?()
When attempting to start a main propulsion diesel engine, the engine, the engine turns at the proper speed but will not startYou should check the()
In twin-screw engine installations while going ahead,maneuvering qualities are most effective when the tops of the propeller blades both turn().
After the engine is warned, we should() the turning gear before starting up the engine.
During (), the starting air valves should be closed to prevent the engine from turning.
When the movement of engine is no longer required the pilot usually gives the order like this() .
When turning the engine with turning gear, you should keep the indicator cocks ().
A twin screw vessel,making headway with both engines turning ahead,will turn more readily to starboard if you().
Be sure to make the engine turn by () before starting and after stopping .
While a ship with twin screw is making a turn, in order to prevent overload, the duty engineer should ()
If a diesel engine driving a generator turns over freely but fails to fire properly, the cause could be ()
During the inspection, the starting air valves should be closed () the engine from turning.
Start the turning gear, and with some one hand-operating the cylinder lubricators at regular intervals, and with the indicator cocks (), and with the control gear in the ()position, give the engine at least one complete turn.
Whilst the engine is turning, check to see that no water is leaking into the crankcase, scavenge air belt, or from ().
Which of the following may cause that an engine doesnt turn on starting air?()
An interlock in the remote operating valve line stops the valve () when the engine turning gear is engaged.
What is the speed of the crankshaft in a four-stroke/cycle engine when the camshaft is turning at 750 rpm?()
Always ensure that the turning gear is______, even at the quay, the wave from other ships may turn the propeller and thus the engine.
What performance should a pilot of a light, twin-engine airplane be able to maintain at VMCA