-
You work as a network technician at. Your boss, Mrs. , is interested in the Spanning Tree Protocol timers. What can you tell her regarding the default STP timers? ()
A . The hello time is 5 seconds.
B . The forward delay is 10 seconds.
C . The hello time is 2 seconds.
D . The forward delay is 15 seconds
E . The max_age timer is 15 seconds.
F . The hello time is 10 seconds.
G . The max_age timer is 20 seconds.
H . The forward delay is 20 seconds.
I . The max_age timer is 30 seconds.
-
As an experienced technician, you are responsible for Technical Support. A customer calls to ask the best signal level and noise level for cell phone. How to respond?()
A . -40dBm signal and -90dBm noise
B . -50dBm signal and -90dBm noise
C . -30dBm signal and -90dBm noise
D . -20dBm signal and -90dBm noise
-
You work as a network technician at Certkiller .com. Please study the exhibit carefully. What does "locking Down" the router entail?()https://assets.asklib.com/images/image2/2018073114272525417.jpg
A . Disabling HTTPS access to Cisco SDM
B . Prohibiting console access to Router
C . Preventing any alterations to the router’s running configuration
D . Disabling all vulnerable Services on the Router
E . Shutting down all the router’s interface
-
You work as a network technician at Certkiller .com. Please study the exhibit carefully. The exhibit is an example of which technology being implemented?()https://assets.asklib.com/images/image2/2018073114112240664.jpg
A . Spanning-tree
B . 802.1Q
C . VLANs
D . PAT
E . QoS
-
You work as a network technician at Company. Your boss, Mrs., is interested in the Cisco Compatible Extensions program. What are three features of this program? ()
A . Accounting
B . Analog and digital voice
C . Mobility
D . Security
E . Routing and switching
F . VLAN and QoS
-
You are operating a multi-vendor network and are considering adding redundancy at the access level. Which routing redundancy solution should you implement?()
A . Both Gateway Load Balancing Protocoland Hot Stand by Router Protocol
B . Gateway Load Balancing Protocol
C . Virtual Router Redundancy Protocol
D . Hot Stand by Router Protocol
-
As the network technician at Company, you need to configure DHCP snooping on a new switch. Which three steps are required? ()
A . Configure the switch to insert and remove DHCP relay information (option-82 field) in forwarded DHCP request messages.
B . Configure DHCP snooping globally.
C . Configure the switch as a DHCP server.
D . Configure DHCP snooping on an interface.
E . Configure all interfaces as DHCP snooping trusted interfaces.
F . Configure DHCP snooping on a VLAN or range of VLANs.
-
You work as a network technician at Certkiller .com. Please study the exhibit carefully. From this Cisco SDM security Audit Wizard screen, what should you do to secure the Router?()https://assets.asklib.com/images/image2/2018073114365065712.jpg
A . Click Next
B . Click Fix All, then Next
C . Click Fix All, then clear CDP check box, then Next, then manually disable CDP on the WAN interface
D . Click Fix All, the clear CDP check box, the Next
E . Click Fix All, then Clear CDP check box, then Next, then Immediately reboot the router
-
As an experienced technician, you are responsible for infrastructure design and global configuration changes. You are asked to deploy a Voice over Wireless LAN for your company. If the cells have the same channel, the separation between them should be:()
A . 19dbm
B . 10dbm
C . 67dbm
D . 86dbm
-
You are docking a vessel starboard side to with the assistance of two tugs.You are attempting to hold the vessel off by operating both tugs at right angles to the vessel and at full power.You must ensure that().
A . steerageway is not taken off
B . the bow doesn't close the dock first
C . the bow closes the dock first
D . the ship has no headway at the time
-
You work as a network technician at Company. Your boss, Ms. , is interested in the Aironet enterprise solutions. What should you tell her regarding this?()
A . The Cisco Aironet AP handles real-time portions of the LWAPP protocol, and the WLAN controller handles those items which are not time sensitive.
B . A Cisco Aironet AP handles the transmission of beacon frames and also handles responses to probe-request frames from clients.
C . Virtual MAC architecture allows the splitting of the 802.11 protocol between the Cisco Aironet AP and a LAN switch.
D . A Cisco Aironet solution includes intelligent Cisco Aironet access point (APs) and Cisco Catalyst switches.
E . In the Cisco Aironet solution, each AP is locally configured by the use of either a web interface or the command line interface.
-
You work as a network technician at Company. Your boss, Mrs., is interested in LWAPP (Lightweight Access Point Protocol). What should you tell her regarding this technology? ()
A . LWAPP is a proprietary protocol, and because of its very high overhead it is not widely adopted.
B . Control traffic is encapsulated in UDP packets with a source port of 1024 and a destination port of 12223.
C . Layer 3 LWAPP is a UDP/IP Frame that requires a Cisco Aironet AP to obtain an IP address using DHCP.
D . Data traffic is encapsulated in UDP packets with a source port of 1024 and a destination port of 12223.
E . Control traffic is encapsulated in TCP packets with a source port of 1024 and a destination port of 12223.
F . Data traffic is encapsulated in TCP packets with a source port of 1024 and a destination port of 12223.
-
You work as a network technician at Company. Your boss, Ms., is interested LWAPP (Lightweight Access Point Protocol). In particular she wants to know which type of activities this protocol defines. What should you tell her? ()
A . Layer 3 addressing and distribution
B . SNMP monitoring services
C . Access point certification and software control
D . Packet encapsulation, fragmentation, and formatting
E . Compression and Layer 3 address mapping
F . User behavior
-
When you are firing a pyrotechnic distress signal,it should be aimed at().
A . straight overhead
B . at the vessel whose attention you are trying to get
C . into the wind
D . about 60 degrees above the horizo
-
You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?()
A . router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B . router(config-if)#142.8.2.1 0.0.3.255
C . router(config-if)#ip address 142.8.2.1 255.255.252.0
D . router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E . router(config-if)#ip address 142.8.2.1 0.0.3.255
F . router(config-if)#ip address 142.8.2.1 subnet mask /22
-
You are a technician at TestKing. Your newly appointed TestKing trainee is setting up a new frame relay connection to a remote branch and wants to know what the valid options for frame relay LMI types are.What would your reply be?()
A . EIA/TIA
B . Q.932
C . Q.933 A
D . IEEE
E . IETF
F . Cisco
G . ANSI
-
You are a technician at TestKing. Your newly appointed TestKing trainee wants to know what the CDP is.What would your reply be?()
A . It is globally enabled by default on Cisco routers.
B . It is globally enabled by default on all routers.
C . It is a proprietary protocol.
D . It is a non-proprietary protocol.
E . It can be used to gather hardware and protocol information about neighbor devices.
-
You work as a network technician at Company. Your boss, Mrs. , is interested in GLBP. In particular, she wants to know the multicast address that this protocol uses. What should you tell her? ()
A . 224.0.0.100
B . 224.0.0.1
C . 224.0.0.102
D . 224.0.0.10
E . 224.0.0.101
F . None of the other alternatives apply
-
You are a trainee technician at TestKing, Inc. Your instructor tells you to backup an IOS image of a Cisco device to a Windows 2003 server on the network.What should you do first?()
A . Make sure that the network server can be accessed.
B . Check that the authentication for access is set.
C . Assure that the network server has adequate space for the code image.
D . Verify any file naming and path requirements.
E . Make sure that the server can load and run the bootstrap code.
-
You work as a network technician at Company. Your boss, Mrs. , is interested in switch spoofing. She asks you how an attacker would collect information with VLAN hoping through switch spoofing. You should tell her that the attacking station... ()
A . ...uses VTP to collect VLAN information that is sent out and then tags itself with the domain information in order to capture the data.
B . ...will generate frames with two 802.1Q headers to cause the switch to forward the frames to a VLAN that would be inaccessible to the attacker through legitimate means.
C . ...uses DTP to negotiate trunking with a switch port and captures all traffic that is allowed on the trunk.
D . ...tags itself with all usable VLANs to capture data that is passed through the switch, regardless of the VLAN to which the data belongs.
E . None of the other alternatives apply
-
You work as a network technician at Certkiller .com. Please study the exhibit carefully. Which two interfaces are enabled for 802.1Q encapsulation?()https://assets.asklib.com/images/image2/2018073114345074049.jpg
A . Router Certkiller 2,Gig 0/1
B . Switch Certkiller B,Fast Port 1 to 24
C . Switch Certkiller A,Gig Port 9
D . Router Certkiller 2,Gig 0/0
-
Pause to empasize, like when you are asking a thought provoking question, making a strong statement,at punctuation -longer at footsteps, and shorter at comas.
-
If you are in a speaking competition, you can just look at judges who smile at you.
-
Your company network consists of a single Active Directory domain named The network has a print server running Windows 2003 Server. A single printer is installed on the print server. Technicians in the IT Support department have the necessary permissions to manage printers on the print server.You are a member of the Domain Admins group.A user in the Accounts department reports that his documents are not printing. A technician named John examines the print queue and finds a list of documents waiting to be printed. John tries to delete the documents from the queue but is unsuccessful.You need to enable users to successfully print.What should you do?()
A. Install a new print device. Reconfigure the printer to send print jobs to the new print device.
B. Stop and restart the Print Spooler service on the print server. Instruct users to resubmit their print jobs.
C. Install a second instance of the printer. Configure the print queue to hold mismatched documents. Redirect the original printer to the new printer.
D. Install a second instance of the printer. Delete the original printer. Instruct users to resubmit their print jobs.