-
A patch has been applied to the operating system. After rebooting, the system is hung. Which of the following commands should have been performed to prevent the system from hanging?（）
A . lppchk, bosboot
B . lslpp -l, oslevel
C . installp -C, lppchk
D . bosboot, synclvodm&e
-
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
-
You have a computer that runs Windows Vista (x86). You need to perform a clean installation of Windows 7(64-bit). What should you do?（）
A . From the Windows 7 installation media, run Rollback.exe.
B . From the Windows 7 installation media, run Migsetup.exe.
C . Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Upgrade option.
D . Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select the Custom (advanced) option.
-
A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）
A . Reinstall the CDE software
B . Check the name resolution
C . Uncomment the last line in .dtprofile
D . Boot in maintenance mode and perform fsck on file system
-
A developer complains that after making changes to a store JSP， the original content still displays in the browser. Which of the following steps should the administrator perform to try to solve the problem？（）
A . Ensure that the modified JSP is located in the correct directory and has the correct timestamp.
B . Stop and restart the WebSphere Commerce Server.
C . Stop and restart the database server.
D . Clear the WebSphere Commerce cache.
E . Refresh the URL Views registry using the WebSphere Commerce Administration Console.
-
After the initial cleaning of fule gas in an inert gas system is passed through what devoce for final cleaning?（）.
A . Scrubber
B . Demister
C . Deck water seal
D . Final filter
-
You are performing a database recovery because a user’s schema is dropped. While performing the recovery， you use the UNTIL SEQUENCE clause. Which type of database recovery are you performing？（）
A . user managed complete recovery
B . user managed incomplete recovery
C . RMAN-based complete recovery
D . RMAN-based incomplete recovery
-
After performing a clean shut down of the database instance for maintenance， you mount the database andthen execute a command to open the database：SQL> ALTER DATABASE OPEN； Which two statements are true（）
A . The online redo log files and online data files are opened.
B . All the online data file headers are checked for consistency.
C . Instance recovery is performed before opening the database.
D . The path and existence of all the log file members are checked
-
Please arrange（）a cleaning gang to sweep out all the ship’s cargo holds to enable her to receive cargo at this port.
A . to
B . with
C . by
D . for
-
An administrator performs a Live Partition Mobility operation. After the operation completes， the administrator runs errpt -a. What is the machine ID reported by errpt command？（）
A . The machine ID of the machine that logged the error
B . The machine ID of the machine that it is currently running on
C . The administrator defined machine ID in the /etc/machineid file
D . The machine ID of the machine that the operating system was originally started o
-
An administrator performs a Live Partition Mobility operation. After the operation completes， the administrator runs errpt -a. What is the machine ID reported by errpt command？ （）
A . The machine ID of the machine that logged the error
B . The machine ID of the machine that it is currently running on
C . The administrator defined machine ID in the /etc/machineid file
D . The machine ID of the machine that the operating system was originally started o
-
After you have restored and recovered a database to a new host by using a previously performed Recovery Manager （RMAN） backup， which is the best option you would consider for the new database？（）
A . Opening the database in RESTRICTED mode
B . Opening the database with the RESETLOGS option
C . Setting a new DBID for the newly restored database
D . Restoring the server parameter file （SPFILE） to the new host
-
After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
-
You perform a clean installation of Windows 7 on a computer. You need to ensure that you can runWindows XP Mode in Windows 7. What should you do?（）
A . Enable hardware-assisted virtualization.
B . Create a Data Execution Prevention (DEP) exception.
C . Install Windows XP in the same partition as Windows 7.
D . Install Windows XP in a different partition than Windows 7.
-
A system is experiencing performance problems. After checking the CPU usage, the problem identified is that the system is "CPU Bound". Which of the following outcomes will determine if there is a possible CPU constraint?（）
A . Low paging
B . High paging
C . Workload manager is not turned on
D . A high run queue length&e
-
The cleaned heated oil, after passing through the centrifuges, is to be pumped to a （）.
A . settling tank
B . service tank
C . ballast tank
D . drain tank
-
You perform a clean installation of Windows XP Professional on a computer. The computer is a member of a workgroup. You need to enable offline files on the computer. What should you do first?（）
A . Disable Fast User Switching.
B . Run the Accessibility Wizard.
C . Set the Startup type of the Volume Shadow Copy Service (VSS) to Automatic.
D . Set the Startup type of the Network Location Awareness (NLA) service to Automatic.
-
After installing a new p5 595, the system performs poorly. Which of the following services would provide updates needed to fix the problem?（）
A . Alert
B . Fix Central
C . Software Maintenance
D . Performance Monitoring
-
After the initial cleaning of flue gas in an inert gas system the gas is passed through what device for final cleaning?（）
A . Scrubber
B . Demister
C . Deck water seal
D . Final filter
-
A system administrator needs to replace a mirrored disk. After performing the proper removal process and replacing the disk, which of the following set of commands should be performed to bring the disk back into production?（）
A . reboot, mklvcopy, syncvg
B . cfgmgr -vl ssar, chvg -va, syncvg
C . cfgmgr, extendvg, syncvg
D . extendvg, mklvcopy, syncvg
-
After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
-
Simultaneous Multithreading （SMT） is enabled in a POWER6 VIO client running AIX 6.1. Which command would be used to disable it after the next operating system reboot is performed？（）
A . schedo -o smt=0 -p
B . smtctl -m off -w boot
C . chdev -l sys0 -a smt=off
D . echo 0 > /proc/sys/smt_enable
-
During a cluster functionality test， and administrator performs a graceful stop for Node ’B’ in a three-node cluster. What is the expected state of the cluster after Node ’B’successfully completes？（）
A . All cluster resources halt on Node ’B’，and one or both surviving nodes will gracefully acquire the resources.
B . All cluster processes halt on Node ’B’，the cluster resources remain active，and the remaining nodes take no action.
C . All cluster processes stay active on Node ’B’，cluster resources are halted，and the remaining nodes take no action.
D . All cluster resources will stop，cluster processes halt on Node ’B’，and the remaining cluster nodes take no action.
-
Parkinson’s disease was named after Parkinson, a German psychiatrist.
