-
Company.com has an EMC disk array and would like to connect it to a Virtual I/O Server on a pSeries p5-520. How can the EMC device drivers be installed?()
A . Use smitty install on the client partitions.
B . Use padmin command in the VIO Server.
C . Use the oem_setup_env environment in the VIO Server.
D . Use cfgmgr to detect/configure the devices within the client AIX partition.
-
After installing a new hydraulic pump in a system, what special attention should be given to the hydraulic system?()
A . The relief valves in the system should be readjusted
B . The filters and strainers should be checked frequently
C . All system pressure should be readjusted
D . The system should be drained and renewed with a fluid of different operating characteristic
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?()
A . Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
B . Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
C . Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
D . Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
-
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC. What is the most probable cause of this problem?()
A . DLPAR functions are not available for cloned partitions
B . The new partition has the same node number as the original LPAR
C . Additional filesets need to be reinstalled after the alt_disk_install cloning
D . The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
-
After installing WebSphere Commerce V 5.6 using a quick installation, which of the following should be checked to verify the installation?()
A . The installation log files
B . The Commerce tools can be launched and logged into properly
C . User ’wpadmin’ has been created
D . The structure of the installation directory
E . The WebSphere Application Server database schema
-
Companycom has a p5 595 with no DVD configured on this server. How can they install the Virtual IO Server code?()
A . From the HMC
B . From a NFS mount
C . From a FTP server
D . From any CD or DVD drive on another server
-
Which of the following should be done FIRST when setting up a new p5-520 to be managed by a new HMC via a private network?()
A . Change passwords in ASMI
B . Add the managed system to the HMC
C . Connect the p5-520 to a power source
D . Connect the HMC and the p5-520 server’s HMC1 port to the same network
-
After you install a new updsate, an application on the computer fails to run. You need to remove the update.
What should you do?()
https://assets.asklib.com/images/image2/201807311620583037.jpg
A . A
B . B
C . C
D . D
-
A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server. Which of the following provide post install diagnostics()
A . SPOT
B . lpp_source
C . mksysb
D . install CD
-
A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?()
A . The routes on the HMC
B . The firewall setting of the LAN adapter
C . The name resolution protocol on the p5 590 server
D . The subnet mask settings on the Ethernet adapter
-
After completing an installation of new software, a system administrator notices the system is slow. To troubleshoot the performance, which single AIX command could be used to provide a real-time display of CPU, memory and disk utilization()
A . topas
B . vmo
C . iostat
D . netstat
-
The customer has recently installed a pSeries p5-570 with EMC attached disk storage. After installation, the customer complained that the disk access appeared to be too slow. How should the pSeries technical specialist best assist the customer?()
A . Recommend the customer call EMC.
B . Recommend the customer call IBM hardware support.
C . Recommend the customer contact SupportLine.
D . Recommend the customer re-creates the volume groups.
-
After you install a new update, an application on the computer fails to run. You need to remove the update. What should you do?()
A . Use the Software Explorer window.
B . Use the Add or Remove Programs window.
C . Restore hidden updates.
D . Use the Installed updates list on the Windows Update window.
-
SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?()
A . SLES does not perform well with DHCP
B . SLES was installed with the default host name of Linux
C . Virtual Network Resources are being used, which is not supported in a SLES environment
D . The SLES instance was installed in 32-bit mode, where 64-bit should have been selected
-
If using alt_disk_install to install AIX on new LPARs, which of the following will be necessary after booting the new AIX image?()
A . Restart the rsct and inetd daemons
B . Customize the node setting in /etc/services
C . Rename the rootvg filesystems to their original names
D . Customize the node_id file and restart the rsct daemo
-
Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken?()
A . Connect to the network,power on the server,Micro-Partition the server
B . Connect to the HMC,power on the server,Micro-Partition the server,connect to the network
C . Power on server,connect to the network,Micro-Partition the server,connect to the HMC
D . Power on the server,connect to the HMC,Micro-Partition the server,connect to the network
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?()
A . Run ’mkdev’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
B . Run ’mkpath’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
C . Run ’chpath’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
D . Run ’cfgmgr’ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ’cfgmgr’ to discover and configure the disks.
-
A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use?()
A . errpt
B . syslog
C . prtdiag
D . errlogger
-
Oracle Net Configuration Assistant is a post-installation tool that configures basic network components after installation. Which four components are included in the configuration?()
A . Directory server
B . Hostname adaptor
C . TCP/IP host file
D . Connection Manager
E . connecting pooling
F . external procedures
G . listener names and protocol addresses
H . Net Service names in a tnsnames.ora file
I . naming methods the client uses to resolve connect identifier
-
Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?()
A . VIO Server
B . AIX 5.2 ML4
C . Shared Ethernet Adapter
D . AIX 5.3 with Advanced Power Virtualizatio
-
Make sure that the new equipment (install) ______ in a safe manner.
-
Please select check items to be implemented after hardware installation in a ZTE DWDM
A.A.Check of rack and cabinet installation
B.B.Cable inspection
C.C.Label checking
D.D.Site cleaning
-
After you install a new updsate, an application on the computer fails to run. You need to remove the update.What should you do?()
<img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/a2f7d6dcfe728ef416e4f27765cb8f0f.jpg' />
A.A
B.B
C.C
D.D
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters.How should the administrator configure the disks?()
A.Run ‘mkdev‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
B.Run ‘mkpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
C.Run ‘chpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
D.Run ‘cfgmgr‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.