-
For best packet switching performance with crypto, what is the recommend packet switching path in a Cisco Teleworker Router?（）
A . Process Switching
B . Silicon Switching
C . Cisco Express Forwarding (CEF) Switching
D . Autonomous Switching
-
When configuring role-based CLI on a Cisco router，which action will be taken first ？（）
A . Create a parser view called "root view."
B . Log in to the router as the root user.
C . Enable the root view on the router.
D . Enable role-based CLI globally on the router using the privileged EXEC mode Cisco IOS command.
-
A system administrator types the command to change the hostname of a router. Where on the Cisco IFS is that change stored? （）
A . NVRAM
B . RAM
C . FLASH
D . ROM
E . PCMCIA
-
Which is true when describing a connection replication in Cisco ACE？（）
A . It is not supported for SSL connections.
B . It is not supported for non-SSL connections.
C . It can only be configured manually.
D . It has a maximum limit of 50，000 replicated connections.
-
The following command is issued on a Cisco Router： Router（configuration）#logging console warnings Which alerts will be seen on the console？（）
A . Warnings only
B . debugging， informational， notifications， warnings
C . warnings， errors， critical， alerts， emergencies
D . notifications， warnings， errors
E . warnings， errors， critical， alert
-
A network administrator is configuring ACLs on a cisco router,to allow traffic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0and192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）
A . access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B . access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C . access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D . access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E . access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F . access-list 10 permit ip 192.168.146.0 255.255.255.0
-
When configuring a cisco 3845 integrated services router to support 802.11b and g clients. Which of the following commands would be correct？（）
A . router（config-if）# speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
B . router（config-if）# speed 1.0 2.0 5.5 6.0 9.0 basic-11.0 12.0 basic-18.0 24.0 36.0 48.0 54.0
C . router（config-if）# speed basic-1.0 2.0 5.5 basic-6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
D . router（config-if）# speed 1.0 2.0 5.5 basic-6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
-
What is a new feature of the Cisco ISR router? （）
A . advanced integration module
B . FICON ports
C . Cisco CallManager 5.0 support
D . warm Cisco IOS upgrade feature
-
When configuring a serial interface on a router, what is the default encapsulation?（）
A . atm-dxi
B . frame-relay
C . hdlc
D . lapb
E .
-
Which of the following HSRP router states does an active router enter when it is preempted by a higher priority router？（）
A . active
B . speak
C . learn
D . listen
E . init
F . standby
-
A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?（）
A . It checks the configuration register
B . It attempts to boot from a TFTP server
C . It loads the first image file in flash memory
D . It inspects the configuration file in NVRAM for boot instructio
-
After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?（）
A . Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software.
B . Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST.
C . Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software.
D . POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements.
E . Load and test IOS, load configuration files, test software routines, POST.
-
Why is the Cisco Integrated Services Router product line A good choice for customers?（）
A . it isA point product solution that addresses a single need
B . it provides customers with an opportunity to increase the number of devices in their network
C . it simplifies purchasing because there is only one model to choose.
D . it integrates multiple services intoA single platform and reduces operating costs.
-
What is the recommended Cisco DSCP value for a switch or router passing Cisco Unified Wireless IP Phone 7921G RTP packets?（）
A . CS3
B . CS1
C . EF
D . 5
E . 6
-
Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）
A . The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2
B . The configuration is invalid because the DHCP options are global configuration commands
C . The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces
D . The router will choose which pool to use based upon the interface the DHCP request wasreceived o
-
A network administrator is configuring ACLs on a cisco router, to allow affic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0 and 192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）
A . access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B . access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C . access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D . access-list 10 permit ip 192.168.146.0 0.0.1.255
E . access-list 10 permit ip 192.168.148.0 0.0.1.255
F . access-list 10 permit ip 192.168.146.0 255.255.255.0
-
A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS image. What function does the router perform next?（）
A . It checks the configuration register.
B . It attempts to boot from a TFTP server.
C . It loads the first image file in flash memory.
D . It inspects the configuration file in NVRAM for boot instructions.
-
What is the first step that you would use Cisco Product Advisor for when selecting a router for an Edge solution？（）
A . determine types of protocols to be supported
B . determine the environment in which the router will be used
C . select the number of WAN ports required
D . select the number of LAN ports required
-
A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?（）
A . There is an error in the router DRAM.
B . Te IOS image is corrupt.
C . The configuration register is set to 0x2142.
D . The TFTP server that contains the router configuration file is unreachable.
E . A boot system configuration command has placed the router into setup mode.
-
What s the default stratum clock on a Cisco router，when you see the key word "master" configured on the NTP line？（）
A . 1
B . 2
C . 4
D . 6
E . 8
-
What is the OSPF default frequency,in seconds,at which a cisco router sends hello packets on a multi-access network?（）
A . 10
B . 40
C . 30
D . 20
-
With a VPN Accelerator Module 2+ (VAM2+) installed in a Cisco 7200 series router, what will be the resulting action when entering the command no crypto engine accelerator slot number?（）
A . disables OIR on the VAM2+ module
B . removes the VAM2+ crypto engine feature and disables the associated configuration commands from the router
C . disables dual VAM2+ hardware stateful failover capabilities
D . disables the crypto engine hardware acceleration, resulting in all crypto functions to be performed in software
-
A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）
A . It checks the configuration register
B . It attempts to boot from a TFTP server
C . It loads the first image file in flash memory
D . It inspects the configuration file in NVRAM for boot instructio
-
使用Router(config) line con 0 和Router(config-line) login local命令给console设置密码保护后，发现不能从console登录到Cisco路由器了，可能的原因是：()
A、在设置密码保护前没有创建账号
B、Router(config) line con 0 和Router(config-line) login local命令根本就不对
C、console登录时用户名和密码输入错误
D、可能是没有设置console登录连接超时，所以配置的密码保护不生效
