-
Users complain an AIX server is running slow. Which of the following commands can be run to determine what is consuming systems resources？（）
A . tprof
B . lpstat
C . ps aux
D . entstat
-
While using the smit install_remove menus to remove some filesets on an AIX 5.3 server， a system administrator notices the /usr filesystem is now unnecessarily large. Which of the following actions will reduce the size of the /usr filesystem （）
A . Backup， unmount， remove， recreate and restore the filesystem.
B . Boot from mksysb tape and select Shrink filesystems on restore.
C . Unmount， run defragfs /usr and the reducefs -size n /usr commands.
D . Update the /image.data file with the desired size for /usr and reboot the system.
-
An administrator plans to use bootable AIX media to boot a system into maintenance mode. The system is running AIX 5.3 TL09 with a64-bit kernel.The administrator has a selection of media available. Which media should the administrator use?（）
A . AnyAIXbootablemedia，providingitisa64-bitvariant
B . AnyAIXbootablemedia，providingitisAIX5.1orlater
C . AnyAIX5.3bootablemedia，providingitisTL09orlater
D . AnyAIX6.1bootablemedia，providingitisTL02orlater
-
Which operating system can directly host managed storage for IBM i, AIX, Linux, VMware and Windows on a Power Systems server?（）
A . AIX
B . IBMi
C . Linux
D . VIO Server
-
A customer needs to remove an unnecessary, but active paging space called paging00 on an AIX 5L system. Which of the following procedures should be used to properly remove the paging space with the least amount of disruption?（）
A . Remove the paging space with the rmps command.
B . Disable the paging space with the chps command, swapoff /dev/paging00, and remove the paging00 logical volume with the rmps command.
C . Reboot the system and disable the paging space with the rmps command.
D . Disable the paging space with the chps command, swapoff /dev/paging00, reboot the system, remove the paging00 logical volume with the rmps command.&e
-
A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server. Which of the following commands is required to complete the activation？（）
A . telinit -q
B . startsrc -s bootpd
C . refresh -s inetd
-
Which operating system can directly host managed storage for IBM i, AIX, Linux, VMware and Windows on a Power Systems server?（）
A . AIX
B . IBM i
C . Linux
D . VIO Server
-
A System p administrator needs to upgrade a system from AIX 5.2 to AIX 5.3. Which of the following installation methods would minimize downtime（）
A . Migration installation
B . Partition Mobility
C . alt_disk_install
D . update_all smit fastpath and reboot during the next scheduled outage
-
An AIX system administrator has setup disk quotas. Where can the reports be found on the system?（）
A . /var/adm/acct/sum
B . /var/adm/ras
C . /usr/sbin/acct
D . /var/adm/wtm
-
After completing an installation of new software， a system administrator notices the system is slow. To troubleshoot the performance， which single AIX command could be used to provide a real-time display of CPU， memory and disk utilization（）
A . topas
B . vmo
C . iostat
D . netstat
-
A customer has a requirement to eliminate single points of failure for an application. They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）
A . Etherchannel and trunking
B . Network Interface Backup and Etherchannel
C . Shared Ethernet Adapter （SEA） Failover and Etherchannel
D . Network Interface Backup and Shared Ethernet Adapter failover
-
When trying to run topas on an AIX 4.3.x system， the system administrator gets the error message "ksh： topas： not found." Which of the following options is the most likely reason this occurred？（）
A . The fileset bos.perf.tools is not loaded on this system.
B . The fileset perfagent.tools is not loaded on this system.
C . The command topas is only available in AIX version 5.x.
D . The path variable does not include /usr/samples/kernel/. Either add it to the .profile or cd to that location and run the command again.
-
Which command is used to switch from AIX to the System V printing subsystem on AIX 5L Version 5.1?（）
A . switch.prt -s AIX
B . switch.prt -s SystemV
C . switch.prt -d AIX
D . switch.prt -d SystemV&e
-
An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the sever is at base AIX5.3. What action needs to be taken to apply the new technology level to the server（）
A . Run smit update_all
B . Run smit install_all
C . Boot from the installation media
D . Run the update_all command from the mounted CD
-
A production system needs to be upgraded from AIX V5.2 to AIX V5.3. All system logs and users need to be saved. Which installation method will accomplish the upgrade（）
A . Update Installation
B . Migration Installation
C . Preservation Installation
D . Mirror rootvg prior to a Preservation Installatio
-
An AIX system administrator wants to reset the level at which the SIGDANGER signal is sent to processes so appropriate actions can be taken when paging space is running low. Which of the following commands is used to reset the level？（）
A . vmtune -w
B . svmon -w
C . schedtune -w
D . vmstat -
-
Which of the following commands should an AIX system administrator invoke to check if the required device-dependent software is missing？（）
A . dbx
B . cfgmgr
C . telinit q
D . lsdev -Cc adapter
-
The system administrator notices that IP packets are not getting forwarded. The system administrator wants to use an AIX machine as an internetwork router over TCP/IP networks. Which of the following commands will allow this change on the fly？（）
A . Some network attributes are runtime attributes that can be changed at any time. Others are loadtime attributes that must be set before the netinet kernel extension is loaded and be placed in the /etc/rc.net or /etc/rc.bsdnet file. This parameter cannot be done on the fly， since a reboot is required.
B . Add to the /etc/rc.net file or if a Berkelye-style network configuration， /etc/rc.bsdnet， and issue the command： no -a ipforwarding=1 to start ipforwarding immediately.
C . Add to the /etc/rc.net file or if a Berkeley-style network configuration， /etc/rc.bsdnet， and issue the command： no -o ipforwarding=0 to start ipforwarding immediately.
D . Add to the /etc/rc.net file or if a Berkeley-style network configuration， /etc/rc.bsdnet， and issue the command： no -o ipforwarding=1 to start ipforwarding immediately.
-
An AIX server will not boot in normal mode and the server must be booted into maintenance mode to rebuild the boot logical volume. A NIM master is not defined in this environment. How is the system booted into maintenance mode to perform this task （）
A . Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.
B . Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.
C . Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.
D . Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.
-
A system administrator identified a problem with an AIX command and implemented a work-around. A call was made to IBM Support to report the problem. What severity level should the administrator choose？（）
A . Crit-Sit
B . Severity 1
C . Severity 2
D . Severity 3
-
Which of the following is the smallest separately installable unit on an AIX system?（）
A . File
B . Fileset
C . Bundle
D . Licensed program product
-
A System p administrator in a manufacturing customer plans to migrate an AIX 5.2 system to a new LPAR on an existing System p using VIOS. Which of the following must be completed prior to this migration （）
A . Upgrade system firmware to latest level
B . Upgrade to AIX 5.3
C . Upgrade HMC to version 6.1
D . Convert rootvg filesystems to JFS2
-
An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the server is at base AIX 5.3. What action needs to be taken to apply the new technology level to the server？（）
A . Run smit update_all
B . Run smit install_all
C . Boot from the installation media
D . Run the update_all command from the mounted CD
-
New AIX systems arrive without a CDROM drive. All systems do not have the system hardware configuration. Which of the following options is the most appropriate way to install AIX on the systems?（）
A . Install CDROM drives or tape drives on the systems because that is the only way to install AIX.
B . Install one system. Take a mksysb from the first system and resotre the mksysb to the remaining systems.
C . Install one system. Mirror rootvg onto a disk from each of the remaining systems.
D . Setup and NIM master and resources.
