-
Company.com has recently received a new p5-570 in the data center and wants to Micro-Partition the server. The customer already has an existing HMC connected to a p690. Which of the following actions should the technical specialist take？（）
A . Order a POWER5 HMC
B . Connect to the existing HMC
C . Install an 8-port asynchronous card in the managed server to connect to the existing HMC
D . Install an additional network card to the existing HMC and connect to the POWER5 service processor
-
You have a single server that has a Server Core Installation of Windows Server 2012 R2. How would you install the graphical user interface （GUI） to this server？（）
A . You should use Windows PowerShell to run the Enable-NetFirewallRule command.
B . You should use Windows PowerShell to run the Add-WindowsPackage command.
C . You should use Windows PowerShell to run the Install-WindowsFeature command.
D . You should use Server Manager console on to add the User Interfaces.
E . You should use Server Manager console to add the Infrastructure feature.
F . You should use Server Manager console to add the Windows feature.
-
Your customer has converted from traditional servers to BladeCenter technology and has a requirement for an RSA adapter on a new BladeCenter server. Which of the following options would you use？ （）
A . Remote Supervisor Adapter II （RSA II Slimline）
B . Management Module， which comes standard on the BladeCenter
C . Acoustic Attenuation Module
D . Ethernet NIC
-
our company has a domain controller that runs Windows Server 2008 R2 and the DNS role.The DNS domain is named contoso.com.You need to ensure that inquiries about contoso.com are sent to dnsadmin@contoso.com. What should you do？（）
A . Create a Signature (SIG) record for the domain controller.
B . Modify the Name Server (NS) record for the domain controller.
C . Modify the Service Location (SRV) record for the domain controller.
D . Modify the Start of Authority (SOA) record on the domain controller.
-
Company.com has an EMC disk array and would like to connect it to a Virtual I/O Server on a pSeries p5-520. How can the EMC device drivers be installed？（）
A . Use smitty install on the client partitions.
B . Use padmin command in the VIO Server.
C . Use the oem_setup_env environment in the VIO Server.
D . Use cfgmgr to detect/configure the devices within the client AIX partition.
-
Company.com has purchased a 2-way p5-520 and would like to create three Micro-Partitions on the server. Which feature of Advanced POWER Virtualization would allow them to create the desired number of partitions？（）
A . Virtual Ethernet
B . Shared Ethernet Adapter
C . Dedicated Processors
D . Shared Processor Pool
-
Your company has a server that runs Windows Server 2008. The server has the Web Server （IIS） role installed. You need to activate SSL for the default Web site. Which two actions should you perform？（）
A . Obtain and import a server certificate by using the IIS Manager console.
B . Select the Generate Key option in the Machine Key dialog box for the default Web site.
C . Add bindings for the HTTPS protocol to the default Web site by using the IIS Manager console.
D . Install the Digest Authentication component for the Web server role by using the Server Manager console.
-
Companycom has a p5 595 with no DVD configured on this server. How can they install the Virtual IO Server code?（）
A . From the HMC
B . From a NFS mount
C . From a FTP server
D . From any CD or DVD drive on another server
-
Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address.You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.What should you do？（）
A . Create a new scope for the DNS servers.
B . Create a reservation for the DHCP server.
C . Configure the 005 Name Servers scope option.
D . Configure an exclusion that contains the IP addresses of the four DNS servers.
-
Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do？（）
A . Create a new scope for the DNS servers.
B . Create a reservation for the DHCP server.
C . Configure the 005 Name Servers scope option.
D . Configure an exclusion that contains the IP addresses of the four DNS servers.
-
Cer-tech .com has a server that runs Windows Server 2008. You have installed Windows Share Point Services （WSS） role on the Windows Server 2008 server. You want to configure WSS to supportSMTP. What should you do to achieve this task？（）
A . Reinstall the WSS role
B . Open the Server Manager console and install Application Server
C . Configure port 25 for WSS role
D . Open the Server Manager console and install the SMTP Server feature
-
Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken？（）
A . Connect to the network,power on the server,Micro-Partition the server
B . Connect to the HMC,power on the server,Micro-Partition the server,connect to the network
C . Power on server,connect to the network,Micro-Partition the server,connect to the HMC
D . Power on the server,connect to the HMC,Micro-Partition the server,connect to the network
-
You work as a database administrator for Certkiller .com. In your database server， the parameter PLSQL_OPTIMIZE_LEVEL has been set to 2. What would this setting achieve？（）
A . It degrades the run time and compiler performance.
B . It provides better run time and compiler performance.
C . It provides better optimization of the statement during parse time.
D . It forces the rule based optimizer to be used for statement optimization.
E . It provides better run time performance but slightly degraded compiler performance.
F . It provides better run time performance but slightly degraded run time performance.
-
Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients. What should you do？ （）
A . Create a new scope for the DNS servers.
B . Create a reservation for the DHCP server
C . Configure the 005 Name Servers scope option
D . Configure an exclusion that contains the IP addresses of the four DNS server
-
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has one hard disk that contains one volume. You need to receive a notification when the volume has less than 15 percent free disk space. What should you do? （）
A . Configure a Trace Log by using the File details system provider.
B . Configure a Trace Log by using the Disk input/output system provider.
C . Configure an Alert by using a counter from the Logical Disk performance object.
D . Configure an Alert by using a counter from the Physical Disk performance object.
-
You have a server named Server 1.Server1 runs Windows Server 2012 R2. Server1 has a thin provisioned disk named Disk1.You need to expand Disk1.Which two actions should you perform？（）
A . From File and Storage Services， extend Disk1
B . From File and Storage Services， add a physical disk to the storage pool
C . From Disk Management， extend the volume
D . From Disk Management， delete the volume， create a new volume， and then format the volume
E . From File and Storage Services， detach Disk1
-
MySQL is installed on a Linux server and has the following configuration:
https://assets.asklib.com/images/image2/2018080117282355979.jpg
What is the purpose of changing ownership of datadir to the ‘mysql’ user?（）
A . MySQL requires correct file ownership while remaining secure
B . MySQL needs to be run as the root user, but file cannot be owned by it
C . MySQL cannot be run as the root user
-
Your company has a domain controller that runs Windows Server 2008 R2 and the DNS role. The DNS domain is named contoso.com. You need to ensure that inquiries about contoso.com are sent to dnsadmin@contoso.com. What should you do？（）
A . Create a Signature (SIG) record for the domain controller.
B . Modify the Name Server (NS) record for the domain controller.
C . Modify the Service Location (SRV) record for the domain controller.
D . Modify the Start of Authority (SOA) record on the domain controller.
-
Company.com recently experienced an unanticipated system outage when the VIO server was upgraded. The current p5-570 has six Micro-Partitions and a VIO server partition. How can a similar outage be avoided in the future？（）
A . Use DLPAR to avoid an outage.
B . Deploy a redundant VIO server in the POWER5 system.
C . Add additional Host Bus Adapters and Network adapters to the VIO server.
D . Implement a standby server and move all partitions to it before applying future updates.
-
You have a server that runs Windows Server 2008. The server has the Windows Server virtualization role service installed. You need to merge a differencing disk and a parent disk. What should you do？（）
A . Edit the parent disk.
B . Inspect the parent disk.
C . Edit the differencing disk.
D . Inspect the differencing disk.
-
Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names. Which record should you create？（）
A . Pointer (PTR)
B . Host Info (HINFO)
C . Service Location (SRV)
D . Canonical Name (CNAME)
-
Your partner company has a single domain named partner.com. The partner.com DNS zone is Active Directory-integrated. The IP addresses of the DNS servers in the partner domain will change. You need to
A．Createastubzoneforpartner．comoneachDNSserverincontoso．com．
B．ConfiguretheZoneReplicationScopeforpartner．comtoreplicatetoallDNSserversintheforest．
C．Configureanapplicationdirectorypartitioninthecontoso．comforest．EnlistallDNSserversinthecontoso．comforestinthepartition．
D．Configureanapplicationdirectorypartitioninthepartnerforest．EnlistallDNSserversinthepartnerforestinthepartition．
-
Your network consists of one Active Directory forest that contains two domains namedDomain1.contoso.com and Domain2.contoso.com. The functional level of the forest is Windows Server 2003.The domains contain the global security groups shown in the following table.Each domain has three servers. Each server has a group named Sales-Applications-Local. TheSales-Applications-Local groups are used to grant permissions to resources on the servers.You need to implement a solution to meet the following requirements:Allow Sales department employees from any domain to access the Sales department resources in any domain.Minimize administrative effort when membership of the Sales department changes, additional domains are added,or additional servers are added.What should you do？ （）
<img src='https://img2.soutiyun.com/shangxueba/ask/17130001-17133000/17130429/bf8057609f4797423559244897ea263f.jpg' />
A. ·On each of the servers, add Domain1-Sales-Global and Domain2-Sales-Global to Sales-Applications-Local. ·In Domain1, create a universal security group named Sales-Department-Universal. ·Add Domain1-Sales-Global and Domain2-Sales-Global to Sales-Department-Universal.
B. ·On each of the servers, add Sales-Department-Universal group to Sales-Applications-Local. ·In each domain, create a domain local security group named Sales-Applications-Domain-Local. ·In each domain, add Domain1-Sales-Global and Domain2-Sales-Global to Sales-Applications-Domain-Local.
C. ·On each of the servers, assign permissions to Sales-Applications-Domain-Local from the local domain. ·Create two universal security groups named Domain1\Sales-Department-Universal andDomain2\Sales-Department-Universal. ·Add Domain1\Domain1-Sales-Global to Domain1\Sales-Department-Universal. ·Add Domain2\Domain2-Sales-Global to Domain2\Sales-Department-Universal.
D. ·On each of the servers, add Domain1\Sales-Department-Universal and Domain2\Sales-Department-Universal to Sales-Applications-Local.
-
Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008 R2, and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1.Which command should you use？（）
A. ipconfig /registerdns:local.contoso.com
B. dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimary
C. dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dns
D. netsh interface ipv4 set dnsserver name=±local.contoso.co¡± static 10.0.0.1 prima
