The lubricating system for the cylinder walls is different from the bearings in that the oil for former one is supplied in （） while that for latter one is （）.
（）is harmful for fuel pumps, fuel valves, cylinder liner, exhaust valve seats, and the turbocharger blades as well.
In the sentence “In some designs the cylinder oil is timed so that the oil injects only on the piston ring belt, the "piston ring belt" means （）.
In some diesel engine designs,（）the injection of cylinder oil is timed to impinge when the piston and only impinge on（）
The （）pump is usually used as the lubricating oil pump.
When in operation, it is unavoidable that a small amount of oil （） through leakage, and in order to compensate for these leaks the system is connected to a feed pump.
The oil is drawn from a drain tank through （）, one of a pair of pumps, into one of fine filters.
Heat for igniting the fuel oil in the cylinder of a diesel engine is generated by the （）
In general, the oil mist defectors include a base plate with air blast pumpThe function of air blast pump is to （）crankcase.
Fuel oil is pumped by means of （） from the bunker tanks.
An axial piston, variable stroke pump is used in a vessels hydraulic steering gearUnder pressure, oil continually leaks out from between the valve plate/cylinder barrel and will（）.
If a heavy sea strikes the rudder, the shock is transmitted through （） to the rams, this cause a sudden increase in oil pressure in one of the cylinders.
Because the timing of injection is crucial, （） mounted on the camshaft, which is driven by the crankshaft are used to operate the fuel pumps, one of which is provided for each cylinder.
Fuel oil discharged to the diesel engine cylinder is atomized at the （）
The cleaned heated oil, after passing through the centrifuges, is to be pumped to a （）.
Oil is supplied to the cylinder wall and （） by means of mechanical lubricators.
The common method of applying oil to the cylinder walls is by means of small pump assembled in units, known as （）.
The lubricating oil is pumped from the drain tank, very often with （） in the suction line.
Your vessel is taking on fuel oil when a small leak develops in the hose and you have ordered the pumping stoppedBefore resuming pumping，you should（）.
In a typical fuel oil system, the oil is stored in tanks in the double bottom from which it is pumped to （） and heated.
（） that everything in the engine crankcase is correct, start up the crankcase lubricating oil pump.
As for an oil-fired boiler if at a normal steaming condition and water goes out of sight in gauge glasses the action you should take is: （） (1) secure oil to fires (2) increase feed pump pressure
The cylinder oil is pumped into the cylinder （via non-return valves) when the piston rings
The pumps press oil into the cross-head bearing gap when the load on the shell is at its lowestWhat is the meaning of “its” in the sentence above？
